Jump to content


Photo

Modification and Paintjob Pictures

POST PICTURES ONLY. How hard is that.

5162 replies to this topic

#2651 princexbuster

princexbuster

    Member

  • Members
  • 176 posts

Posted 04 December 2009 - 05:25 PM

I LOST!
Fires all kinds of ammo! Longshot barrels fit nicely into bbb arrows.
Posted Image

My first nitefinder. Had no handle, now it does(bbbb handle). Super minimized.
Posted Image

Watch out pittsburgh nerf here comes a beast!
Posted Image
^The original mega mav revamped. In the process of taking of the 2'' pvc and putting on inch and a quarter. Scatter shot and sm3k pump (5 pumps to glory 8 pumps to scary power that I'm not useing because im scared to break my blaster ya know one less and all that crap)
This isn't a nerf gun but is a sweet t-shirt design I'm making.

Edited by princexbuster, 04 December 2009 - 05:48 PM.

  • 0
Sexy Dwarves.

#2652 Colbs

Colbs

    Member

  • Members
  • 41 posts

Posted 04 December 2009 - 07:27 PM

Posted Image
Red Tiger DTB :D

Posted Image
Minimized and rebarreled crossfire

Posted Image
rebarreled switch-shot module, plus firing button :P

PS. How can you keep the DTB's cocking mech. from chipping away paint when you pull it back? :wacko:
  • 0

#2653 alextwin007

alextwin007

    Member

  • Members
  • 96 posts

Posted 04 December 2009 - 10:51 PM

Just finished this a few minutes ago. It's a hand cannon with a firefly turret.
Posted Image

Posted Image

I forgot, it's rear loading.
  • 0
Join the revolution
Nerf Revolution

#2654 Zorns Lemma

Zorns Lemma

    Sir Scrt

  • Moderators
  • 1,277 posts

Posted 05 December 2009 - 07:54 AM

The Sylow Conjugator

Posted Image

Bike pump. Same pressure as old pump, but in 1/3 as many pumps.

Posted Image

Shotgun attachment. 1/2" PVC stub in a 1-1/2" to 1/2" PVC slip bushing in a cut down 1-1/2" PVC coupler. Fits into any 1/2" coupler to adapt it to 1.5" PVC shells. 4" shells with 4 CPVC barrels.
Here's a spacer template:
Posted Image
I'm sure I could fit in 6 or 7 PETG barrels, but PETG doesn't fit my darts and brass is expensive. 4 is plenty anyways.

Posted Image

Super internals. 3/4" to 1/2" PVC slip bushing solvent-welded to tank. Epoxy putty on the shell around the bushing for more support and to take stress. External tubing in case I ever add a hard tank (also for the external OPRV). Tubing is put into both the bike pump and tank through superglue + solvent weld + goop (let set/cure at each stage).

Posted Image

1/8" PVC sheet + ABS/PVC cement + epoxy putty = invincible trigger.
  • 0
"In short, the same knowledge that underlies the ability to produce correct judgement is also the knowledge that underlies the ability to recognize correct judgement. To lack the former is to be deficient in the latter."
Kruger and Dunning (1999)

#2655 diamondbacknf1626

diamondbacknf1626

    Member

  • Members
  • 835 posts

Posted 05 December 2009 - 09:53 AM

^Looks awesome. I'm liking the shotgun attachments. I'm assuming those would be helpful during DTC rounds^

Anyway...my take:

The Totally Awesomesauce Unnamed BBBB

Posted Image

Got the idea from zorn's BBBB above awhile back, and decided to make my own. Hole in the front was almost perfect...missed by a little bit:
Posted Image

The pump I used is a bike pump and a little smaller than Zorn's, I believe. This one's dual action though, so it makes up for what it lacks in volume. I use 7-8 pumps. I've pumped it up to 12 before, and probably could pump it up more than that, but I really just don't...7-8 shoots pleanty far. Speedloader's new, suggested by Zorn. I usually use 4" of 17/32" in 12" of PETG, but I tried this out, and it hits better at 7 pumps than the other at 9.

Posted Image
Posted Image
In both locations, tubing had to be twisted in, so it was first superglued in place, then covered with a layer of goop, then 48 hrs. later followed by epoxy putty. Tubing's joined outside with the barbed adaptor. No glue or anything. Holds up just fine. mine's just external simply because it makes my life loads easier, and if I ever want to remove the tank, I can muscle the barb out of the tubing. If it were a continuous length, it'd be stuck because the pump is fixed.

Posted Image
Detatchable, adjustable Firefly stock. This portion makes this blaster one of the most comfortable I own. There's a coupler secured to both the gun and the stock, so I can use different lengths of PVC to suit different blasters. This is all I really have though so far that I use it on, but I'll definitely be making some more blasters to accept it.

Again, credit to Zorn for the original idea, and a great one, too.

EDIT- Yeah, those are my basement stairs, I know they're kinda dirty.

Edited by diamondbacknf1626, 05 December 2009 - 09:54 AM.

  • 0
QUOTE(TxNerfer @ Nov 13 2010, 12:42 PM) View Post

Hey...I got a crazy idea: how about you stop all that sigging stuff? It's not even my thread and it annoys me.

#2656 Merzlin

Merzlin

    Member

  • Members
  • 589 posts

Posted 05 December 2009 - 06:45 PM

So, ya, I got a Crossbow.

It's named Marcus.


Posted Image
Posted Image
Posted Image
  • 0

#2657 diamondbacknf1626

diamondbacknf1626

    Member

  • Members
  • 835 posts

Posted 05 December 2009 - 06:58 PM

Woot, now it's not a double post. Looks good, btw, but you already knew that.

Posted Image
My rearloading 3k. Now made to accept my Firefly stock. I also re-did the seal, and it fires a lot harder now. I'm guessing around 140 with good darts. It was tagging 130 before.

Posted Image
I use the stock upside down on this one...just more comfy for some reason.

Posted Image
New rearloading slot thing...much better lined up than my original one. Works a lot better.

Posted Image
Posted Image
Hopper Clipped 2k. The clip is fixed (not removable), and holds 5 darts. Hornet pump. Only a little external tubing...looks a lot cleaner without the wireloom, but I put it there to protect it. Goo guage is drained but not removed. Shoots pretty hard. I like it.

Posted Image
End cap with little flap made out of e-tape so it doesn't fall. Also, the etape keeps it from slipping all the way on, so it's still easy to just pop off with my thumb.

That's it for now, I think...
  • 0
QUOTE(TxNerfer @ Nov 13 2010, 12:42 PM) View Post

Hey...I got a crazy idea: how about you stop all that sigging stuff? It's not even my thread and it annoys me.

#2658 BritNerfMogul

BritNerfMogul

    Member

  • Members
  • 560 posts

Posted 06 December 2009 - 12:32 PM

Posted Image
Posted Image

I never was too keen on the Raider's front grip...

Paint coming soon.
  • 0

#2659 k9turrent

k9turrent

    Member

  • Members
  • 829 posts

Posted 06 December 2009 - 01:53 PM

Just a teaser :)
Posted Image
  • 0
QUOTE View Post

That's about it. And thanks Angela who helped me with these pictures.. It looks huge in her hands.


HOLY CRAP!

FU ALL

#2660 popatachi

popatachi

    Member

  • Members
  • 206 posts

Posted 06 December 2009 - 11:19 PM

One of the splat series. CPVC coupler and padding added to the plunger header and spring rest. Removed part of the barrel tip.

I don't have ranges as it was snowing and it's night time.

Posted Image

And here's a tip. Need a half coupler? If you don't want to spend time cutting up a full coupler, get an end cap and drill a hole through it.

Posted Image

Make sure to make the hole smaller than the original hole so that the pipe doesn't go through. You can see in the picture below the ridge in the cap.

Posted Image
  • 0

#2661 Mr BadWrench

Mr BadWrench

    Member

  • Members
  • 781 posts

Posted 07 December 2009 - 01:11 AM

Posted Image
  • 0
NerfChat IRC Chatroom Click to chat!

#2662 OnyxZenith

OnyxZenith

    Member

  • Members
  • 191 posts

Posted 07 December 2009 - 01:18 AM

HAH FUNTIONING 3 SHOT CLIPPED SSPB! I have a write-up, go check it out!

Posted Image
  • 0
SoothSayer-


"Just adding some lube and twisting it back and forth for a while should make it easier"

Subscribe to my Music page and mods >> http://www.youtube.com/user/OnyxMP312

#2663 NerfRogue83

NerfRogue83

    Member

  • Members
  • 646 posts

Posted 07 December 2009 - 01:19 AM

Base coat #1 on, lots of wet sanding needed. Bondo work was extensive, but will be worth the effort in my opinion when its finished. Finished shots by weeks end......I hope!

Posted Image
Posted Image
Posted Image
  • 0
IRC chat: louiec3-- he offered $500 for someone to build a bomb he could send to his ex wife
Rknight-- wow......N9---your dad is in trouble now!


#2664 cheesypiza001

cheesypiza001

    Member

  • Members
  • 752 posts

Posted 07 December 2009 - 01:47 AM

My rear-loading PETG SM1500. I used Ryan's idea for a PVC stock and for a new pump (though I used a Magstrike pump). Also, Ryan made the spacer.

Posted Image

Posted Image

Posted Image


My ERTL Pump Action Shotgun (PAS). It is couplered, reinforced, has almost all the deadspace removed, added trigger spring, added catch spring, increased seal, and spring addition.

Posted Image


If you have any questions, comments, or suggestions, feel free to PM me. Thanks.
  • 0

#2665 Ice Nine

Ice Nine

    Prince Dangus

  • Administrators
  • 1,460 posts

Posted 08 December 2009 - 12:03 AM

<WHOA GUYS SUPER ADVANCED STUFF>

The BritBreech

What happens when you mix me, pvc, petg, sandpaper, files, and a hacksaw


Fucking REVOLUTIONARY! In that same vein I'm going to post up something I came up with at the last mod party for sole use on the DBNFIGZ<3P. I call it:

The EZkieLOADER.

So, check it:

Posted Image

Got your barrel, right? Get it in some PVC.

Posted Image

Throw a BUSHING on that bitch. Rad. Look at that plunger head.

Posted Image

Posted Image

Then you jam that PVC INTO the bushing! Yes, you read and saw CORRECTLY.

Posted Image

Not only THAT! IT'S FUCKING UNIVERSAL.

Posted Image

Posted Image

The DBNFIGZ<3P breaks one hundred with the BRISC and one ten with the hopper. Barrel is too long. Shoots streamlines like a motherfucker, though.
  • 0

Unholy Three: DUPLUM SCRTA, DUPLUM PROBLEMA (2009)

But Zeke guns tend to be like proofs by contradiction

Theoretically solid but actually non-constructive

Rnbw Cln


#2666 cheesypiza001

cheesypiza001

    Member

  • Members
  • 752 posts

Posted 08 December 2009 - 12:11 AM

More 1500 stuff:

Posted Image

Posted Image
  • 0

#2667 BritNerfMogul

BritNerfMogul

    Member

  • Members
  • 560 posts

Posted 08 December 2009 - 07:48 AM

Ah....
Ice nine's trying to be funny...

Variety is the spice of life.
Posted Image

I altered my breech to work on my brit bow. Previously, the opening was too far inside the shell.
Posted Image
Posted Image
  • 0

#2668 NerfDude1138

NerfDude1138

    Member

  • Members
  • 114 posts

Posted 08 December 2009 - 03:05 PM

PAS, following FA's 'Rambo' mod or whatever its called. LS spring, gets 100+ feet. I lost the stefans so I can't be absolute certain. Also broke a decoration off the wall by mistake with it, oops.

Posted Image

Posted Image
PETG speedloader.

Posted Image
  • 0
Check out all my mods on FU.

Foam Universe
We are a friendly and rapidly growing Nerfing community.

#2669 princexbuster

princexbuster

    Member

  • Members
  • 176 posts

Posted 08 December 2009 - 09:11 PM

Posted Image
Effeminate holsterness! Sweet idea for the phone case Flamin.

Posted Image
It's not what you think.

Posted Image
Fuck the What!?!

Posted Image
Can the jobar and cobra do this?

... It's ORANGE!

@ numat49: secrets don't make friends. They DO however get you torchered by russian eco terrorists.
Aslo PAS = way better than doubleshot! But in all seriousness a rapid fire would be crazy to weild.

Edited by princexbuster, 08 December 2009 - 10:50 PM.

  • 0
Sexy Dwarves.

#2670 diamondbacknf1626

diamondbacknf1626

    Member

  • Members
  • 835 posts

Posted 08 December 2009 - 09:31 PM

Posted Image

'tis a green, decrapified Mega Missile. Decrapified by rork, turreted by me.

Posted Image

Takes 1 pump, hits 90-100 ft. The firefly turret works on any pvc couplered blaster, by the way. It's 12" of PETG per barrel with 2 1/2" (if I recall correctly) of 17/32" nested in the PETG. I luz it.
  • 0
QUOTE(TxNerfer @ Nov 13 2010, 12:42 PM) View Post

Hey...I got a crazy idea: how about you stop all that sigging stuff? It's not even my thread and it annoys me.

#2671 Reconman24

Reconman24

    Member

  • Members
  • 16 posts

Posted 08 December 2009 - 09:32 PM

My new raider
it has a super clip, ar removal, custom sight, and a old nitefinder spring in the back.
Posted Image
Posted Image

Edited by Reconman24, 08 December 2009 - 09:33 PM.

  • 0

#2672 numa-t49

numa-t49

    Member

  • Members
  • 119 posts

Posted 08 December 2009 - 10:38 PM

This is a Singled Titan with an integrated RF20.................Ya Inegrated!!!!!!!
Posted Image
The RF20 is fired using the Hornet trigger on the Titan...... Dont ask how I did it because I wont tell you.....Unless you are cool enough!
Posted Image
The RF20 is stock and the Titan is singled and NOT plugged because this is a Christmass present for my 10 year old brother.

My current WIP:
Posted Image

It is being crossbowed like this one:
Posted Image

It will also be integrated woth a RF20

It will also have a write up by Christmass

Edited by numa-t49, 08 December 2009 - 10:47 PM.

  • 0

#2673 taerKitty

taerKitty

    Member

  • Members
  • 883 posts

Posted 09 December 2009 - 11:39 PM

My office. Yes, my boss knows.

Posted Image

All but the Recon are modded. For some reason, my coworkers don't want to get into a Nerf fight with me...
  • 0
Fugly is a feature.

#2674 NerfDude1138

NerfDude1138

    Member

  • Members
  • 114 posts

Posted 10 December 2009 - 03:40 PM

Spy Gear Signal Launcher - PVC coupler

Posted Image
  • 0
Check out all my mods on FU.

Foam Universe
We are a friendly and rapidly growing Nerfing community.

#2675 A side of nerf

A side of nerf

    Georgia Nerf Lives

  • Members
  • 755 posts

Posted 10 December 2009 - 08:46 PM

Alakazam:
Posted Image

BBBB:
Posted Image


Marsh mellow gun:
Posted ImagePosted Image
  • 0
Southeast Nerf Contingent


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users