Jump to content


Photo

Modification and Paintjob Pictures

POST PICTURES ONLY. How hard is that.

5162 replies to this topic

#3551 blitz

blitz

    Member

  • Members
  • 285 posts

Posted 16 February 2011 - 11:43 AM

Posted Image
SGSL with Hornet tanks, all fire at the same time, very fun in DTC.

ARE YOU HAPPY JAKE?
  • 0
Blitz, member of the FNBS
"sexual innuendo no intendo"

#3552 Eik

Eik

    Member

  • Members
  • 120 posts

Posted 18 February 2011 - 10:13 AM

Got some paint on my SNAP
Not my favorite scheme, but its different
Posted Image
Posted Image
Posted Image
  • 0

#3553 BritNerfMogul

BritNerfMogul

    Member

  • Members
  • 560 posts

Posted 18 February 2011 - 02:40 PM

Posted Image

So far, I've tripled the ranges to 15ft, and I'm not done yet...
  • 0

#3554 louiec3

louiec3

    Member

  • Members
  • 316 posts

Posted 18 February 2011 - 08:31 PM

I finished my 5k thanks to atomatron.
The scope is actually useful.

Posted ImagePosted ImagePosted Image
  • 0

#3555 Kid Flash

Kid Flash

    Member

  • Members
  • 1,985 posts

Posted 18 February 2011 - 10:13 PM

Stock, Mint LnL that actually is up on eBay.
Posted Image
Posted Image
Posted Image
Posted Image

I also have internal pictures for my SalvoFly V2:
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image

And a VIDEO!
  • 0

#3556 Abyss Mods

Abyss Mods

    Member

  • Members
  • 205 posts

Posted 18 February 2011 - 10:24 PM

Ohio Revolution attendees beware...
Posted Image
Breech for now; hopper to come.

Edited by Abyss Mods, 18 February 2011 - 10:28 PM.

  • 0

#3557 Exo

Exo

    Member

  • Members
  • 391 posts

Posted 19 February 2011 - 06:37 PM

Lots of guns, I like to buy the gun, mess with it, and call it a prototype. Sometimes.

Low-level mods on MS, FF, BCD.
Posted Image
Holdout blasters: BP removed T3, CPVC'd T3, couplered and weirdly plugged SSPB.
Posted Image
Turrets: Piston broke on RF20, MVK wasn't working well.
Posted Image
The rest of the RF20
Posted Image

First time with pics, so if they're too large, then I'll change that next time.
  • 0

#3558 pjotrkuh

pjotrkuh

    Member

  • Members
  • 259 posts

Posted 20 February 2011 - 01:30 PM

Pictures containing other naked bodyparts other then hands and fore arms should be forbidden.......

Look what I cooked a Firefly-rev8 with a 3K filling:

Posted Image

Here are some pics during cooking:

Posted Image

Posted Image
  • 0
When the shit hits the fan, you'd better wear a rain coat.....

#3559 venom213

venom213

    Member

  • Validating
  • 1,294 posts

Posted 20 February 2011 - 03:05 PM

Overhauled Airtech 3000:
This blaster has been through a lot. I completed the mod about a year ago, and it has surprisingly needed just a few repairs in that time. It's been used in numerous wars by several different nerfers. The coupler on the back is held in by screws on both halves of the shell and is there to attach a stock to. I put 1" segments of 17/32" Brass at the back of each barrel. The brass helps dart stay in much better.

Posted Image

It's equipped with two of my revised barrel spacers. Originally it just had one spacer and it was made out of Acrylic. The construction of that was frustrating to say the least. Use proper materials!

Posted Image

I used an external pump because I didn't want to take the time to make space for it in the shell as well as it being accessible without having to open up the entire blaster.

Posted Image

I used a Shrader to 1/8" NPT adapter to connecting the pump to the Brass elbow. There's a 1/8" NPT Hose Barb connector in the other end of the elbow which connects to the airtank.

Posted Image

The rotation mech weakened over time and eventually snapped at the part where it connected to the shell. Nothing a huge glop of hot glue can't fix.......

Posted Image

I've been very happy with this blaster. Even though I made it at a time when I was far less skilled and rushed to complete it, it turned out well and still functions acceptably to this day.

Edited by venom213, 20 February 2011 - 03:23 PM.

  • 0

#3560 SonReeceSonJensen

SonReeceSonJensen

    Member

  • Members
  • 662 posts

Posted 20 February 2011 - 08:04 PM

That beast spews a mighty wrathy load.


Here is a contract I finished this afternoon for a guy in my office. AR's out, Padded plunger tube to kill that terrible plastic on plastic sound, and some metallic paint for S+G's.
Posted Image
  • 0
The Difference:
-Guns shoot bullets that kill people
-Blasters shoot darts that tag people

I do not play with guns.

#3561 Hipponater

Hipponater

    Member

  • Members
  • 297 posts

Posted 20 February 2011 - 11:11 PM

Another one of these things. It was reasonably tricky to get it firing perfectly without jamming

Posted Image

Posted Image

Posted Image

Posted Image
  • 0

#3562 Eik

Eik

    Member

  • Members
  • 120 posts

Posted 23 February 2011 - 05:28 PM

Clear paint on a clear Mav

Posted Image
Posted Image
Posted Image
Posted Image
  • 0

#3563 KitAdrian

KitAdrian

    Member

  • Members
  • 39 posts

Posted 23 February 2011 - 05:53 PM

Beautiful Maverick, allow me to post my own.

"But it's missing the button to change the cylinders!"

"Wait, what's that sticking out the bottom?"

I present to you: Recently Updated Lever Action Triple Maverick.

Posted Image

Posted Image


I stole my "liddle brudda's Eastah Basket" and cannibalized the handle into a lever by drilling a hole through it for the second (non-screwed) post just in front of the trigger. The lever pivots on that post, pulling back the cylinder catch assembly by hooking a flat portion of the handle under the catch face.

Takes a little oomph to do it, so this is not one for the kiddies and the limp-wrists, but being able to release the cylinders on my beast without having to take my hand off the handle is kinda nice, especially considering my plans to mount it to the lower half of a Magstrike and Semi-Auto it(Same method as the Semi Auto Firefly). I still haven't decided if I want to use a Hornet tank or a Salvo tank for the shoota. Can anyone tell me (PM) if a Salvo will fit in a Mav Shell? If I have to cut the main shell a bit, that's fine, but I'd like to be able to keep the priming handle clean for appearances.

I considered having the button as a backup, but it was in the way of the lever, so I took it out, which is fine, now I have a window to see if the catch is set or not.

If someone has a clear catch button from a clear mav that I could have (or buy) that would be awesome (PM me)
  • 0

#3564 BrokenSVT

BrokenSVT

    Member

  • Members
  • 128 posts

Posted 24 February 2011 - 10:34 PM

Oh shiz, there be two of 'em now:

Posted Image

This one is Kid_Flash's, made from the tank in the writeup.

Edited by BrokenSVT, 25 February 2011 - 11:07 AM.

  • 0
REVOLUTION Be there or be square.

#3565 Ice Nine

Ice Nine

    Prince Dangus

  • Administrators
  • 1,460 posts

Posted 26 February 2011 - 03:43 PM

Mod party yesterday. Mod party has degenerated into "Zorn is dead, Zeke builds Big Blasts, and Ryan and Kane build random things and have conferences, and then we play video game" parties.

Big Blast v1.1:

Posted Image

Big Blast v2.0:

Posted Image

Big Blast v3.2:

Posted Image

The first one needs a new pump, the second needs a small pump fixing, and the third needs trigger refinement.

Group shot:

Posted Image

Side note: McMaster OPRVs are cool, but when they pop, they POP. They dump about half the pressure off the tank nearly instantly instead of slowly venting.

Edited by Ice Nine, 26 February 2011 - 03:47 PM.

  • 0

Unholy Three: DUPLUM SCRTA, DUPLUM PROBLEMA (2009)

But Zeke guns tend to be like proofs by contradiction

Theoretically solid but actually non-constructive

Rnbw Cln


#3566 Green Wing

Green Wing

    Member

  • Members
  • 68 posts

Posted 27 February 2011 - 06:03 PM

Posted Image

Its rear loading. Turret shoots about 60' flat with slug darts. Write up is posted.
  • 0

#3567 Inferno Falcon

Inferno Falcon

    Member

  • Members
  • 196 posts

Posted 28 February 2011 - 12:49 AM

WIP Blast Raider

Just need a pump and a chopper through the shell

Posted Image

Edited by Inferno Falcon, 28 February 2011 - 10:10 AM.

  • 0

#3568 NerfHunter03

NerfHunter03

    Member

  • Members
  • 89 posts

Posted 01 March 2011 - 12:00 PM

This is my first or second post in this thread, since I normally do not take pics. Just a couple things I wanted to share:

Posted Image
^ The 1st Gen TTG in center was done on a day off from class. Both TTGs are plunger-tube replaced, spring swap, CPVC couplered barrel, and 2 10" bungees on each. Then NF is cut down, Spring replaced, CPVC coupled, and PETG Barrel.
Posted Image
^^ This is for the head of the Leadership Program here at college.
Posted Image
^^^ Not a clear pic of the blaster, but its a 2nd Gen TTG, broke the glue dome at 70'. It has the Plunger tube-replaced, New spring (I'm not sure where spring is from), Double O-Ring, CPVC Couplered, CPVC Barrel, 2 10" Bungees.

More to come as I get bored here at school.
  • 0
BritNerfMogul:
QUOTE
We should respect the people who make our blasters. Even if we do molest the hell out of them...

#3569 SlightlySane813

SlightlySane813

    Member

  • Members
  • 213 posts

Posted 02 March 2011 - 01:27 PM

Ciao nerfers! Its been a while since I've posted here.

new stuffs

Posted Image

sexy money shot

Posted Image

Posted Image

for a friend.

oh and never trust a noob with a dremel.

Posted Image

Posted Image

Posted Image

What's so special you might ask.

Its the most accurate gun in my arsenal and is my indoor primary.

Posted Image

Posted Image

1/2 inch brass barrel

Posted Image

sexy and...

Posted Image

double couplered!

write up on supermaxx speakers on request.
  • 0
Also known as the French Canadian eh!

#3570 ahtanie

ahtanie

    Member

  • Members
  • 80 posts

Posted 02 March 2011 - 02:51 PM

Posted Image

Posted Image

Posted Image

Posted Image

Supermaxx 1500 tank fix for those whose tanks exploded from the back.
Minimize your 1'' PVC end cap and glue it to the back.
And remember, 4 (maybe 5?) pumps max!
  • 0

#3571 hummer

hummer

    Member

  • Members
  • 217 posts

Posted 02 March 2011 - 09:41 PM

So I recently had my faith in recons renewed after I stopped by a goodwill, this is what became of it; a Warhammer 40,000 bolt pistol
Posted Image
Posted Image
I made the back psedo-stock detachable by cannibalizing an existing recon stock:
Posted Image
Posted Image
Yes, I know my paintjobs suck, never was good at painting the miniatures either. I also hate realistic-painted Nerf blasters, but this is probably the only exception for me.

EDIT: I only did an AR removal for the innards, I refuse to do anything else because 2 recons have already died on me due to plunger tube failure.

Edited by hummer, 02 March 2011 - 10:00 PM.

  • 0
Into the fires of battle!
Onto the anvil of war!
QUOTE(BustaNinja @ Nov 23 2010, 04:09 PM) View Post

He parkours over flat land while yelling tactical orders at no one. Demon Lord is the most legit ballsy nerfer of all time.

#3572 BrokenSVT

BrokenSVT

    Member

  • Members
  • 128 posts

Posted 03 March 2011 - 12:06 PM

Triple Strike tank fires 4B missiles far. The inside is a maze of tubing that you really don't want to see.

Pay no attention to the ghetto-fied chopper from my OG modding days, it was close by for the pic.

Posted Image
  • 0
REVOLUTION Be there or be square.

#3573 Kid Flash

Kid Flash

    Member

  • Members
  • 1,985 posts

Posted 03 March 2011 - 07:30 PM

My current project:
Posted Image
  • 0

#3574 Abyss Mods

Abyss Mods

    Member

  • Members
  • 205 posts

Posted 04 March 2011 - 09:30 PM

Just a little update on my Mega Missile...
Posted Image
OPRV had to be plugged as it was releasing all the air from the tank for some unexplainable reason.
  • 0

#3575 Ice Nine

Ice Nine

    Prince Dangus

  • Administrators
  • 1,460 posts

Posted 05 March 2011 - 02:31 PM

Mod party as previously defined last night. It's incredible that I was productive for one week; it's even more astounding that I managed to get MORE things done!

Fixed the Tornado's trigger.

Posted Image

It's a trigger that pivots along that screw on the bottom, hitting the lever on the 4B's pin. It dumps air SUPER quickly, more quickly than any of the other 4Bs I have. Supa' nice trigger feel on it too.

Posted Image

Ryan will now demonstrate the optimal barrel for it.

Posted Image

No joke, it's pretty much gun length SCH80. Mad muzzle velocity.

Ryan named it Peepee. It's fitting.

Big Salvo tanks generally don't seem to work with consistently hoppers, no matter how many pumps get put into the tank. But this one does!

Posted Image

Posted Image

Supa' 'spansion. It works excellently. I'm debating making another larger one to use for a semi-auto airgun of sorts.

For reference, he's another BS tank.

Posted Image
  • 0

Unholy Three: DUPLUM SCRTA, DUPLUM PROBLEMA (2009)

But Zeke guns tend to be like proofs by contradiction

Theoretically solid but actually non-constructive

Rnbw Cln



6 user(s) are reading this topic

0 members, 6 guests, 0 anonymous users