I didn't check back more than ten pages on the topic board so I am sorry If this has already come up. Has anyone tried fixing the air restrictor for the Blast Bazooka. It seems like a good enough gun but the range isn't what I want. The Max Shot is still beating the Bazooka is total umph. I want to try taking the pump apart but can't find any good parts to cut yet. Anyone with ideas?
1 reply to this topic
#2
Uncle Hammer
-
- Members
- 750 posts
Member
Posted 19 September 2005 - 04:45 PM
Two things.
1. Theres really only one air restrictor on the whole gun. Look at the barrel. You should see a peive of plastic shaped sorta like a target of some sort. Just pop that off and thats about the best you can do.
2. As for "umph" I've always found that there triggers are hard to pull. If you pull slow all the air comes out slowly. A good hard jerk on it will release it all at once and then you should see an increase in velocity and range.
1. Theres really only one air restrictor on the whole gun. Look at the barrel. You should see a peive of plastic shaped sorta like a target of some sort. Just pop that off and thats about the best you can do.
2. As for "umph" I've always found that there triggers are hard to pull. If you pull slow all the air comes out slowly. A good hard jerk on it will release it all at once and then you should see an increase in velocity and range.
Don't mess with Texas cuz its bigger than France, bitch..
| QUOTE (Talio) |
| Catagory 5 hurricanes are the mighty dick of God. You don't mess with that! You don't mess with Gods dick! |
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
