I took apart my tek 10 to look at the internals, and When I put the gun back together the barrel won't spin when I pull the thing back to load it. Any help will be appreciated.
Tek 10
Started by godzillasoaker65, Sep 16 2005 08:41 PM
2 replies to this topic
#1
Posted 16 September 2005 - 08:41 PM
#2
Posted 16 September 2005 - 09:06 PM
I suggest taking the gun appart again and making sure everything fits in properly. I'm not familiar with the Tek Ten but i think you may have either left out a peice (Is that possible?) or didn't put something in properly. Just take a look at it again and see if you can find anything wrong with it.
"i read that nerfs coming out with a 500 watt lazer light that can burn through walls."
Hell you're lucky if you don't get fucked with a spiked bat
Hell you're lucky if you don't get fucked with a spiked bat
#3
Posted 17 September 2005 - 06:43 PM
I think it was, because I took the barrel assembley apart, and it was loose so it wouldn't turn good. I fixed it by taking of part of the barrel assembly so all there is is the little sticks the air comes out of.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users