Hey guys, i just recently CPVC'ed my maverick and i've been having a problem with my stefans: i don't get good ranges. On average, i get abotu 25 feet, which is less than stock. Any ideas guys? It would be appreciated, thanks.
Maverick Cpvc Mod Problem
Started by
Accord
, Sep 13 2005 01:12 AM
7 replies to this topic
#1
Posted 13 September 2005 - 01:12 AM
#2
Posted 13 September 2005 - 11:11 AM
You know theres other threads about this?
1) The maverick isnt really that powerfull to begun with
2) CPVC probably isnt the best fit for you stefans wich is probably ruining the mod.
1) The maverick isnt really that powerfull to begun with
2) CPVC probably isnt the best fit for you stefans wich is probably ruining the mod.
#3
Posted 13 September 2005 - 12:24 PM
there really arent any other topics about this, i searched.
#4
Posted 13 September 2005 - 01:47 PM
Ok first: Make sure there are no air leaks, cover up all holes where air might escape.
Second: If your going to use cpvc. have fun stretching the shit out of your stefans so they fit.
Third: The best kind of darts that fit into cpvc are the darts that come in the secret strike pocket blaster. They are slightly longer and thinner for some reason. Make loser darts out of those and you are set. Personally I Crayola barreled my Maverick because I cant stand cpvc.
Second: If your going to use cpvc. have fun stretching the shit out of your stefans so they fit.
Third: The best kind of darts that fit into cpvc are the darts that come in the secret strike pocket blaster. They are slightly longer and thinner for some reason. Make loser darts out of those and you are set. Personally I Crayola barreled my Maverick because I cant stand cpvc.
Edited by Forsaken_angel24, 13 September 2005 - 01:48 PM.
I don't get my kicks out of you,
I don't feel the way I used to do.
I know its bad,
After what we had,
But I’m just not the angel you knew.
I don't feel the way I used to do.
I know its bad,
After what we had,
But I’m just not the angel you knew.
#5
Posted 13 September 2005 - 02:17 PM
If you're going to make stefans just for CPVC barrels, then I suggest the following. Use a hairdryer to warm up the darts, and it will shrink them. After that, bend them by hand until they're straight, then toss them in a bucket of really cold water. Then, they fit really nicely in CPVC. I just realized that I was shrinking my darts when I straightened them, so I'll have to use another method.
TS
TS
#6
Posted 13 September 2005 - 03:01 PM
I've always thought that a barrel replacment for the Mav is pointless. The whole purpose of having a tighter barrel is so that the air can compress to it's maximum until the dart leaves. However, in the mav, since the seal between the cylinder and plunger is so poor, you are probably losing a ton of air with a tighter barrel.
"Thats so good it makes me want to kick my mom in the face." -Halfling
#7
Posted 13 September 2005 - 03:08 PM
did I miss something? Or should this go in the mod section, and Maveriks do shoot 20-25 feet flat stock, well at least mine does...
QUOTE ( N-Strike agent 007) |
You posted a link to the forum rule in my thread and I nearly threw my computer out the window. Thats like giving some one a demerit in school and not telling them why just handing them a list of rules because you are TO LAZEY to tell them why. |
#8
Posted 13 September 2005 - 03:22 PM
thanks a lot for the help guys. i tried stretching the stefans and i am getting about 40 feet now, not too bad.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users