Jump to content


Photo

Periscope Gun Mod


8 replies to this topic

#1 Renegade

Renegade

    Member

  • Members
  • 536 posts

Posted 28 August 2005 - 08:50 PM

Renegade’s Off-brand periscope gun mod!

This Mod, does not make your gun into a Periscope, but is for an off-brand gun, that I’ve had for quite a while. The front extends out and can be used as a periscope, which can be shot where you look through the scope. Here are some pictures of it:
Posted Image
Posted Image
Posted Image

Step1—Unscrew the blue casing, above the 2 barrels.
Posted Image

Step2—Pry off the black pumping mech.
Posted Image

Step3—Unscrew the rest of the gun.
Posted Image
As you can see the insides are very small.
Posted Image

Step4—Take out the internals. (Optional: take out all of the periscope parts) Cut off the Stub on the front of the orange piece/barrel.
Posted Image

Step5—Glue a CPVC Coupler onto the orange piece.
Posted Image

Step6—Wrap some duct tape around the CPVC/Airtank
Posted Image

Again, please don't post until, I post the next set of the mod.
  • 0

#2 Renegade

Renegade

    Member

  • Members
  • 536 posts

Posted 28 August 2005 - 08:51 PM

Step7—Cut out the case enough for the coupler to fit in.
Posted Image

Step8—Place the internals back.
Posted Image

Step9—Screw it back together and you’re done!

Here are some pictures of the final product.
Posted Image
Posted Image

Not sure the exact ranges but I expect around 25-30feet.
Which is good compared to the 2-3 feet of range stock.
  • 0

#3 Davis

Davis

    Member

  • Members
  • 210 posts

Posted 28 August 2005 - 10:41 PM

Wow, that is one gimmick I would like a lot on a Nerf gun.

*winks at chiefthe*
  • 0
QUOTE ("Devious")
2. Laugh like a maniac as you pummel them with your balls.

#4 NerfLad78

NerfLad78

    Member

  • Members
  • 263 posts

Posted 03 September 2005 - 03:29 PM

How exactly is the gun primed?
Is the ROF good?
  • 0

#5 Renegade

Renegade

    Member

  • Members
  • 536 posts

Posted 03 September 2005 - 03:45 PM

How exactly is the gun primed?
Is the ROF good?

The Black Piece, that's under the orange rectangle thing, is the pump. It only takes about 5 pumps, which are very small like the SSPB, to prime it. The RoF is pretty good and the breech isn't really needed, since the barrel should be relatively short. I like the gun since it has a nice feel to it, like my LNL, and it looks pretty cool. <_<
  • 0

#6 Beaver Vortex

Beaver Vortex

    Member

  • Members
  • 95 posts

Posted 03 September 2005 - 03:57 PM

There is a bunch of extra room in there now though. Do you think you could fit maybe an at2k in the case as well if you had the pump coming out of the grip, or it is too small for that?
  • 0
I am the Milkman. My milk is delicious.

#7 Renegade

Renegade

    Member

  • Members
  • 536 posts

Posted 03 September 2005 - 03:58 PM

There is a bunch of extra room in there now though.  Do you think you could fit maybe an at2k in the case as well if you had the pump coming out of the grip, or it is too small for that?

Yeah, I've got an extra at2k also, I think I'll try that. <_< Right now the coupler fell off, due to dollar store duct tape, but once everything's done, I'll put up some more pictures.
  • 0

#8 Osiris

Osiris

    Member

  • Members
  • 74 posts

Posted 03 September 2005 - 06:28 PM

If it really does end up shooting 25-30ft then it defintly won't be practical in war. Its like trying to shoot people with an unmodded NF at a war.
  • 0

#9 Renegade

Renegade

    Member

  • Members
  • 536 posts

Posted 03 September 2005 - 06:34 PM

If it really does end up shooting 25-30ft then it defintly won't be practical in war. Its like trying to shoot people with an unmodded NF at a war.

Yeah, it really isn't that practical in a war right now, but I'm busy integrating an at2k into it, and hope to increase the range of the actual gun also. I'll get some more pics up when I'm done.
  • 0


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users