5 replies to this topic

[Renegade]

After Seeing Ompa's Clip Mod, I decided to try and design one of my own. So I searched around my house for something to use as a clip. I then I looked at our old Video Camera Tapes. The case's fit darts, and had a flip open top. So I did some dremeling, and used some cardboard, and I have designed a cheap, easily made, 4-shot gravity fed magazine. It can be taken off and switched with another or flipped to the side, and reloaded . It's basically Zero's homemade breech with a magazine.



Here it is on my Airtech2000. This is the only gun I have used it with, but in theory it should work on almost any gun.

Here is a shot of the actual clip. The Cardboard pieces can be moved to fit differant sizes of stefans.

Here is the clip loaded with 4 stefans.


To load, move the brass forward. then Move the brass back over the dart and into the Stub of 9/16 brass. Repeat. It ocassionally jams, but with stefans of the same length will work fine.


I'll Make a write up, If anyone wants one.

Edited by Renegade, 23 August 2005 - 01:07 PM.

[NerfMonkey]

It looks awesome. I like the way you can just drop darts into the top of it to reload. Good job Renegade I like it a lot.

[rylundo]

It looks a little messey but who cares its awesome. I would and I'am sure others would also like a write up if you are willing to do one but it seems simple enough you would not need one.

[Handlethis]

Not only is it cool, it works... I can vouch for that...

[Uncle Hammer]

From the pics, I'm under the impression that it loads into the barrel from the top? So it's like a breeching gravity clip? Anywho props man.

[Team Slaya]

Hammer, he already said that it was gravity fed, but yeah, you have the basic idea.

Great job man, but there has to be some way to keep them from jamming... What does the dart fall into? If you make a cut open piece of CPVC that the brass slides on top of, the dart will probably jam less. Sorry if that description isn't so clear.

TS