Stock (or almost stock) SuperMaxx 5000, or any other variant
3/4" CPVC
9/16 Brass (I used rigid copper)
Hot glue
E - Tape
HackSaw
What to do:
First, get your CPVC and your Brass and cut 3 inches of CPVC and 3.5 to 4 inches of Brass. Stick the CPVC directly on the orange nozzle of the gun (do not glue it on). Insert the Brass into the CPVC, and hotglue it in.
Click on the thumbnail if it's too small to see a larger version.
Take it off after the hotglue dries and wrap E - Tape around where you glued it for extra support and to hide the fugly hot glue. Voila! Here is your shell. You can make more of these in order to speedload the gun.
Average Range (Level shot): 87.6 ft. With a Stock Dart.
The 5000 used to measure these ranges did not have any internal modification.
P.S. Copper tastes bad.
Edited by NerfLad78, 06 August 2005 - 11:39 AM.