Friction
#1
Posted 30 July 2005 - 11:11 AM
#2
Posted 30 July 2005 - 11:35 AM
After you get this, it will fit perfectly in CPVC with the ramming of a pinky finger at the end and then you can take a sample of the foam to your distributer of PETG. Hope I helped.
#3
Posted 30 July 2005 - 11:35 AM
#4
Posted 30 July 2005 - 11:41 AM
#5
Posted 30 July 2005 - 01:39 PM
-BadAssReptileFarmer to Talio
#6
Posted 30 July 2005 - 02:59 PM
As for your NF, slap a CPVC coupler on it and see if your PETG fits it. If it is loose, then wrap some e-tape around it the one end that you want in the coupler.
#7
Posted 30 July 2005 - 04:36 PM
I use 9/16'' Brass on all my guns. I find it is a good fit for springers yet still gives me good range on my air guns. It is sort of a happy medium. Of course it will be different depending on your foam size, but as you live in the same town as me head over to Home Depot (I hate that store more than anything in this world, minus Blizzard) and buy the 1/2'' FROST KING brand. It fits perfectly.I have a couple barrel materials at my disposal. I have PETG, which is a fairly loose fit and the dart slides in very easily. I also have cpvc, which is an extremely tight fit and I can just barely twist the dart in when I file the inside of the barrel. I know that the looser PETG fit is good for air guns, but should I use the looser PETG on spring guns like my nite finder? The main benefit would be that it would be a lot easier and faster to load if I was using PETG.
#8
Posted 30 July 2005 - 05:07 PM
AA
#9
Posted 02 August 2005 - 10:12 AM
Where did you find white foam? I would love to have some even if it means a little more $$.ACtually, I got PETG form that place that gives free samples and had some that fit my very first batch of FBR perfectly. If yours' is white, then I have had that kind of foam.
#10
Posted 02 August 2005 - 10:39 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users