I was just moding a sspb and was wondering if there was a way to plug the overpresure release valve? If there is a way could somebody please tell me thanks.
Sspb Question
Started by flashflint, Jul 24 2005 03:08 PM
3 replies to this topic
#1
Posted 24 July 2005 - 03:08 PM
#2
Posted 24 July 2005 - 06:35 PM
Um... I believe there are a lot of other post around here about that... if you would like to search.
Otherwise, just saw off the front of the pump tube, taking care not to saw through the actual pump shaft. Then pop some hot glue on the end of the pump shaft... And glue everything back up.
There are also barrel swap mods, and expansion mods as well, if you'd search.
Copy!
Otherwise, just saw off the front of the pump tube, taking care not to saw through the actual pump shaft. Then pop some hot glue on the end of the pump shaft... And glue everything back up.
There are also barrel swap mods, and expansion mods as well, if you'd search.
Copy!
Kids in the backseat cause accidents... Accidents in the backseat cause kids.
#3
Posted 25 July 2005 - 02:49 AM
i think he meant the over pressure release valve in the chamber, which is the firing valve, so in othr words it cant be plugged
-------
COREY
COREY
#4
Posted 25 July 2005 - 03:23 AM
Really? I thought the only thing in the chamber was a back check valve as well as the actual valve (which seems to resemble a quick-exhaust potato cannon valve). I think the over-pressure valve is located only in the pump shaft. Please correct me if I'm wrong!
Copy!
Copy!
Kids in the backseat cause accidents... Accidents in the backseat cause kids.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users