Edited by dragnet88, 13 July 2005 - 11:12 AM.
Singling An Airtech 3000
#1
Posted 13 July 2005 - 06:33 AM
#2
Posted 13 July 2005 - 12:37 PM
Run when you see this scope flashing in the sunlight
Coupler may not work on this because the barrel is really flimsey like if you hit it to hard on a wall you might ass well just rip it off. The pushing in and pulling out of the coupler will mostlikly weaken it and you will probally have to reglue after each use
Edited by fastkill, 13 July 2005 - 12:42 PM.
#3
Posted 13 July 2005 - 01:51 PM
#4
Posted 14 July 2005 - 10:06 AM
#5
Posted 14 July 2005 - 10:52 AM
If you're that far away you're using a scope, I wont need to run. I can take one step to the left or right and probably dodge your dart.
#6
Posted 14 July 2005 - 12:10 PM
You can poop in my toilet anytime champ.
2016 Nerf War Schedule
Bless you, my son. Now recite 3 New Members Guides and 5 Code of Conducts for your sins.
#7
Posted 14 July 2005 - 12:54 PM
But as to the coupler problem, you could take a tiny stub of 1/2 pvc and put it around the place where the air flows out. You'd probably have to put something inside of that as well, but it would be pretty stable.
Something like this
Barrel
Coupler
Piece of PVC
Air hole
The pvc would go over that tiny air hole in which the tank opens to release the pressure. You could probably put some epoxy between the hole and the pvc, which might make it stable enough. Just ideas.
TS
Edited by Team_Slaya, 14 July 2005 - 12:55 PM.
#8
Posted 14 July 2005 - 12:58 PM
I know I went a little overboard on E-tapeFastkill, that At3k is pretty fugly....
#9
Posted 14 July 2005 - 01:02 PM
Eh, I couldn't, honestly, do much better.I know I went a little overboard on E-tapeFastkill, that At3k is pretty fugly....
TS
#10
Posted 14 July 2005 - 10:47 PM
#11
Posted 15 July 2005 - 10:51 AM
Most of the time I agree with you. I just put a pop gun stock on my At2k last night. It's a fugly pile of duct tape, but it's damn comfortable and it ain't going anywhere. So in general I agree that having it be more comfortable and work better is more useful than having it look nice. I would post a pic, but alas, I have no camera. I could probably take stills on my dad's camcorder.... hmmmm.I really dont care on how it looks just as long as it works good and is comfertable wich it is
TS
#12
Posted 15 July 2005 - 11:29 AM
Edited by dragnet88, 15 July 2005 - 12:26 PM.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users