take out all the screws.
rip the little tube thing out of the orange thing that you stick that dart on that was from the handle of the gun. since most of the dohickeys are orange i will refer to this one as orange thingey number 1 and the tube as little tuby thing.( sorry im not very discreptive). on the other end of the tube is yep you geussed it orange thingey number 2.leave that part alone for now. next to it is a big orange tube with three dents in them the top one punched out.with a screwdriver make a hole in the BOTTOM LEFT dent.( if you didnot catch the capital letters its because that parts is important) now make a hole in the front of the gun down and to the right of the hole already there, make it big enough to fit a dart into.now lay orange thingey number 1 in the hole you just created the make the tube the coreect length to reach (you have to cut the tube). then glue the tube in place and glue orange thingey number 1 into place ( i used a hot glue gun). close it up put the screws back in and your ready to go.


IF YOU ARE CONFUSED IN ANY WAY DO NOT DO ANY OF THE ABOVE PROCEDURES UNTILL I POST PICTURES WICH WILL MAKE EVERY THING MAKE MORE SENSE.