2 replies to this topic

[kickass jb]

This is a little something I tried out and it works. This mod will let you shoot both micro stefans and mega stefans from it. First off, follow Yakman's mod and take a piece of 1/2" pvc and glue it/tape it to the o-ring piece of the stock barrel. then put a coupler on the end that would be coming out of the gun and make it so that it stops JUST at the point where the larger stock barrel stops, and glue it in center. So now what I did is I cut two 5" pieces of 1/2" pvc and shoved 5" of cpvc down one of them. So now whenever I want to fire megas, I just stick the mega barrel (pvc) in the coupler and go, and when I want to fire micro stefans I just put the micro barrel (cpvc) in the barrel and go. Have fun.

If you need pictures let me know and I should be able to get them up in a couple of days.

Edited by kickass_jb, 28 May 2005 - 10:01 AM.

[cxwq]

Cool idea, but there is an awful lot of dead air space behind your barrel with that method. What kind of performance do you get?

[kickass jb]

Ranges are without banding or spring replacement (so very minimal for its potential)

Micro: 50ft avg
Mega: 42ft avg

Shot six darts with each, and took the mean average.

p.s. I should be getting a spring for it in a week or two so I will update then as well if someone with a spring replacement hasn't already.

Edited by kickass_jb, 29 May 2005 - 02:06 PM.