6 replies to this topic

[Nerf Warrior]

Alright, I was attempting to mod my SM350 but all I ended up with were the following: Shell
Cocking mechanism
Crayola Barrel
Plunger thing(It is black and near the top when you open up the gun)
Rotating barrrel
Screws and a couple of springs
Tons of PVC piping

Is there any way I can revive or make a new gun with these parts? (I can buy some parts and whatnot to complete this project)
I REALLY NEED HELP!!

Edited by †Nerf Warrior†, 26 May 2005 - 05:19 PM.

[Nerf Warrior]

I would really appreciate if someone would helo me.

[ssgtsiler]

I cannot helo you. Neither can Cxwq, or any other member. However, we can HELP you. Also, read the Code of Conduct before double posting. Have a nice day.
(sorry Cxwq and other forum gods for stealing your thunder, but I had to do it!)

[LiKnSmAkScOmIn]

Tell us what you're missing, that will help out.

Go to nerfevolved.com and look at the SM350 mod and show what you have and dont have from the pictture of internals they have.

[cxwq]

My suggestion would be to buy some parts and remedy the situation as follows:

1. Buy the barrel, plunger, spring, trigger, catch, catch spring, and shell from a NF for approximately $7.

2. Put that other stuff in a bag and hide it somewhere.

3. Enjoy NF.

[Nerf Warrior]

First of all, thank you cx. Secondly, I didn't mean to say helo and I really needed help with this gun. Nobody was responding so the only way to get it to the top of the forum so everybody looked at it was to double post. O yeah, I read the Code of Conduct every week. Thanks for flaming me and being a jerk.

Edited by †Nerf Warrior†, 27 May 2005 - 06:20 PM.

[ssgtsiler]

Thanks! Its no problem, though you could of been more patient and waited longer.