As a newb to the modding scene ( yes, i admit it ), i went out and found some ideas to get me started on improving my arsenal, or lack therof. When attempting to open my At2k, 3/4 of the screws would not come out, for they just kept on spinning in place and clicking every once in a while. To this day, i have still not gotten that case off, and i don't belive i ever will.
Any ideas??
6 replies to this topic
#1
Posted 01 May 2005 - 09:55 PM
#2
Posted 02 May 2005 - 12:30 AM
Stuck screws are normal. They just kinda happen.
That spinning and clicking sounds like the screw is already out- if it does that, try pulling out with your hands or something.
That spinning and clicking sounds like the screw is already out- if it does that, try pulling out with your hands or something.
#3
Posted 02 May 2005 - 12:37 AM
The AT2K has a cap on the the end of the pump, you have to get that off before you can take the gun apart.
http://www.freewebs....ns.htm#28108608
http://www.freewebs....ns.htm#28108608
#4
Posted 02 May 2005 - 05:07 AM
Just keep pulling at what you can get a grip at which is open, and pull.
The cap consistently breaks in the same place.
Easy-peazy-lemon-squeezy.
The cap consistently breaks in the same place.
Easy-peazy-lemon-squeezy.
Edited by Davis, 02 May 2005 - 05:07 AM.
QUOTE ("Devious") |
2. Laugh like a maniac as you pummel them with your balls. |
#5
Posted 02 May 2005 - 03:04 PM
Ok, so most of the case is off, except for the cap that connects the place where the pumper is to the main body. I can't get it off, even after extensive periods of hacking at it.
I know that someone said this, but i couldn't get the pic to load. Send another link please?
*Edit* Ok, just kidding, the site loaded. Sorry for any troubles. *End Edit*
I know that someone said this, but i couldn't get the pic to load. Send another link please?
*Edit* Ok, just kidding, the site loaded. Sorry for any troubles. *End Edit*
Edited by Team_Slaya, 02 May 2005 - 03:06 PM.
#6
Posted 02 May 2005 - 03:07 PM
Did you read that?Just keep pulling at what you can get a grip at which is open, and pull.
The cap consistently breaks in the same place.
Take the gun, and pull. The cap will break off. If the casing breaks-oh well. You can glue it back on when you're finished. Just take the gun, and pull the halves apart...
~Sinfil
#7
Posted 02 May 2005 - 07:09 PM
I actually took a giant wrench and ripped off the cap without breaking it. Dunno, that's how I did it with my sm1500 so I figured I'd do it with my at2k as well.
AA
AA
Indiana '11
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users