6 replies to this topic

[Team Slaya]

As a newb to the modding scene ( yes, i admit it ), i went out and found some ideas to get me started on improving my arsenal, or lack therof. When attempting to open my At2k, 3/4 of the screws would not come out, for they just kept on spinning in place and clicking every once in a while. To this day, i have still not gotten that case off, and i don't belive i ever will.

Any ideas??

[Oddball]

Stuck screws are normal. They just kinda happen.

That spinning and clicking sounds like the screw is already out- if it does that, try pulling out with your hands or something.

[mayhem]

The AT2K has a cap on the the end of the pump, you have to get that off before you can take the gun apart.
http://www.freewebs....ns.htm#28108608

[Davis]

Just keep pulling at what you can get a grip at which is open, and pull.

The cap consistently breaks in the same place.

Easy-peazy-lemon-squeezy.

Edited by Davis, 02 May 2005 - 05:07 AM.

[Team Slaya]

Ok, so most of the case is off, except for the cap that connects the place where the pumper is to the main body. I can't get it off, even after extensive periods of hacking at it.

I know that someone said this, but i couldn't get the pic to load. Send another link please?

*Edit* Ok, just kidding, the site loaded. Sorry for any troubles. *End Edit*

Edited by Team_Slaya, 02 May 2005 - 03:06 PM.

[Sinfil]

Just keep pulling at what you can get a grip at which is open, and pull.

The cap consistently breaks in the same place.

Did you read that?

Take the gun, and pull. The cap will break off. If the casing breaks-oh well. You can glue it back on when you're finished. Just take the gun, and pull the halves apart...

~Sinfil

[AirApache]

I actually took a giant wrench and ripped off the cap without breaking it. Dunno, that's how I did it with my sm1500 so I figured I'd do it with my at2k as well.

AA