7 replies to this topic

[SwitchbladeatJM]

I just got a supermaxx 750, and the bullets I have won't fire in it. I thought it could fire micros, but I guess it doesn't. What type does it fire?

Edited by Switchblade@JM, 18 April 2005 - 06:00 PM.

[J cobbers]

It fires Super maxx darts. They are thicker than micros and have a different type of suctioncup. The Orginal Supermaxx darts were black with pink suction cups and the more common variety were a light green with pink suction cups. After Nerf took over the Supermaxx line most of the guns were converted to micro darts and updated. If I recall correctly the 750 did not get such an update.

You can probably make Mega Stefans to fit in the gun as the foam diameter is similar between a mega and a supermaxx. Alternativly try chopping down stock megas to fit in the barrel.

[SwitchbladeatJM]

I might try that, but I might just put in a new barrel system. I was going to try to put in an at2k barrel system in but I haven't done it yet. Do you guys think it's a good or bad idea? Could I just make stefans that fits the diameter of the of the barrel pump? I would like your guys opinion on this. Thanks thinking This is really confusing me

[Greek Assassin]

You should really just mod it and replace the barrel with whatever you want. PVC works good with nerf micros and mega stefans (Make sure to add a crayola barrel if you plan on using nerf micros) and brass tubing works well with micro stefans. Pm me if you need any help modding the gun.

Edited by Greek Assassin, 18 April 2005 - 06:20 PM.

[LordoftheRing434]

Give it a micro crayola/brass-PVC mod. My friend did that to his gun, and now that thing scares so many people shitless. It is definitely worth looking into. You could make mega stefans, but if it were up to me, I'd do the micro-mod since they are so common.

~Ringsy

[SwitchbladeatJM]

I'll probally do that , or I might quad-barrel an at2k's barrels then add them on. I'll probally try to do the crayola barrel/PVC barrel to my sm750. I've got one more question. What works better, crayola or PVC, and what are the ranges on your friends gun?

[LordoftheRing434]

You actually end up with a crayola inside the PVC. Mod it so you have a crayola barrel to begin with. The PVC slides on later rather nicely. If it's sealed tight, it will do fine. It sounds like you have the old version, since it fires Supermaxx darts. My friend has the newer one; it shoots micros. This won't make much of a difference. His gets about 70-80'. That's just a rough guesstimate, based on the fact that it's a little less than my SM1500 (maybe 90-100')and a little more than my NF (60-70' at best). Toss a PM my way if you run into problems and I'll try to help.

~Ringsy

[SwitchbladeatJM]

So the barrels kind of like the single-barreled at2k's barrel. I could probally do that. I'll PM you guys if IU run into any trouble. Thanks for all of the help.