I'd like to be able to shoot stock micros out of the expand-a-blast mod on the NerfWorld site. Would CPVC fit inside the stock barrel and do the trick? If so, what kind of CPVC? Or should I nest a crayola barrel or something into a 1/2" sch. 40 PVC? What type of barrel would be best to shoot stock micros? Any help would be appreciated. Thanks a bunch!
Question About Barrels
Started by TOFUburger, Apr 08 2005 09:31 PM
3 replies to this topic
#1
Posted 08 April 2005 - 09:31 PM
All bow down to BoltSniper, he is my god.
#2
Posted 08 April 2005 - 10:02 PM
The only type of barrel that I know of that shoots stock micros is a crayola barrel in 1/2 sch40 PVC. I'm not an expert on spring guns but I think about 9 inches should be long enough for a good barrel.
QUOTE (Arcanis @ Apr 9 2005, 12:02 AM) |
When I insert a dick, nothing happens. |
#3
Posted 08 April 2005 - 11:38 PM
Sch 40 with or without a crayola is the only setup that will work with stock micros.
<meta name="cxwq" content="mostly water">
#4
Posted 09 April 2005 - 12:05 AM
Isn't it something like, a barrel for mega Stefans (AT2K/SM1500 pump tubes, SCH 40 PVC, etc.) fits stock micros? And aren't you supposed to wrap the tip in electrical tape or something, so it slides through easier?
"I think politicians are much more irritating than hippies."
"the56ace,
Your member account at NerfHaven has been temporarily suspended because I don't like you."
-cxwq
If ignorance is bliss, our president must be ecstatic.
"the56ace,
Your member account at NerfHaven has been temporarily suspended because I don't like you."
-cxwq
If ignorance is bliss, our president must be ecstatic.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users