I haven't done any internal work to my SM5K(only an externally placed barrel) yet, and when I unscrewed everything, even the screw hidden inside the handle, I cant get it open. It's stuck right near the pump. A picture of the internals would be nice.
3 replies to this topic
#2
The Large Moose
-
- Members
- 254 posts
Member
Posted 29 March 2005 - 10:51 PM
Make sure you have gotten all the screws. I don't think there was a anti-modding cap on it...make sure you got all the screws, and if you are sure, just pull hard.
| QUOTE (Arcanis @ Apr 8 2005 @ 04:02 PM) |
| When I insert a dick, nothing happens. Wierd. |
"Ever have deja vu and amnesia at the same time? I think I have forgotten this before." -Unknown
#3
Jlego
-
- Moderators
- 252 posts
One Armed Clan
Posted 29 March 2005 - 11:02 PM
2 caps exist. One where the pump meets the gun, and one where the barrel attachments go. Just pry those off and that should do it.
-jlego
-jlego
~Jaxon of the LGLF
Gears: Ice9 and I have a relationship similar to that of myself and Jax.
liska: You snuggles?
Gears: The nerfers most likely to engage in a threesome.
I've seen you use an arrowstorm!!
#4
J cobbers
-
- Members
- 586 posts
Member
Posted 30 March 2005 - 10:31 AM
Your problem is that at the base of the pump there is a plastic cap that prevents the pump from slinding out. Get a broad flat head screw driver and you can pop it off. Then the gun should open without a problem.
Edited by J_cobbers, 30 March 2005 - 10:32 AM.
Don't forget to eat your meat based vegetable substitute children.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
