88 replies to this topic

[notorious oxide]

for a level to work everything else that the barrel is attached to has to be straight and level as well

[NerfLad78]

This topic has been hijacked. Back to the subject matter.
I WOULD post one of my guns. If I had a camera.

[Airsoft999]

I got a little sloppy on the paintjob near the end, touching it up this weekend.

[Sqiggs89]

Hey everyone I finally got the pics uploaded and what not. Here they are.

Yeah the old starwars disc shooter.



Pegs taken out.



Pegs taken out.



Nothing special.




pegs taken out.




Still under construction.




My "double double" AT2K, Two crayollas and too pvc/crayollas




Peg taken out, and extra ammo holders




The custom Chain-Fed Nite Finder! Also SSPB inter. Extra ammo holder.




The best weapon of all... The teminator.

Edited by Sqiggs89, 31 May 2005 - 07:38 PM.

[Airsoft999]

Umm... so the chain fed NF just has some barrels duct taped together for breech loading?

[kickass jb]

Airsoft, are those darts the stock ones reglued or are they actually orange stefans?

[Uncle Hammer]

They look like stock darts, but they still look cool. As does your xbow, that thing is swheet.

[Sqiggs89]

Umm... so the chain fed NF just has some barrels duct taped together for breech loading?

Yeah, so I guess it wouldn't be completely chain-fed. But I'm working on it.

[NerfLad78]

Airsoft, I solute you. Sweet CrossBow.

Sqiggs: Nice all around. I have a Star Wars disc Shooter just like that one. I still remember the little Boba Fett target it came with. Your Terminator owns.


Where can I get colored hot glue?

Edited by NerfLad78, 01 June 2005 - 02:51 PM.

[Airsoft999]

The X-Bow should look a little cleaner once I get that splotch of blue paint off of the side. The stefans are made from stock foam- my cousin had a bunch of stock darts that didn't have a suction on them, so I made them stefanish. I put a straw in if for reinforcement, then put a weight in it, and topped it off with some glitter glue found at Michael's. The plain glue didn't look as good with the orange foam. They performed a bit better than my normal stafans, since I established a similar fit, but the foam is (in my opinion) a little higher quality, and the hole allows for a larger surface area thus resulting in more power.

[Sqiggs89]

I think the X-Bow looks frickin' sweet already.

[Airsoft999]

Heh, thanks.

[tucker]

My cpvc'd lnl.
[/URL]http://img162.images...8697/lnl3pm.jpg
My cpvc'd rototrack.
rototrack
My cpvc'd sm1500.
http://img63.imagesh...e=sm15003ui.jpg
My pc with two removable clips and a bycycle inner-tubed bladder.
http://img63.imagesh...63/39/pc6hr.jpg
My vortex Tornado X/2 with the cover taken off.
http://img74.imagesh.../3119/x26bb.jpg

Sorry for the low quality pics.

Edited by tucker, 01 July 2005 - 06:22 PM.

[ompa]

The sm5k is just quadded, the other sm5k has an expanded airtank and an RF20 pump since the original pump started leaking. The Titan has, well, my mod. I also hooked up the valve that originally pumped air to the Hornet to the Titan airtank, in hopes that I could eventually find a way to re-fill the Titan's airtank from an outside source, such as a backpack pvc tank or something. The x-bow is redone from my first version, it now has an xp70 supersoaker valve in there, with an sm1k pump. Both are breech. The x-bow gets about 90-100 (with bands) now that I've fixed the thing, and the xp70 gets around 75-75 on 2 pumps.

The rest of my more "custom" guns are kinda jacked (although with my own improvements, such as the Maverick + NF integration and the NF/RF20 turret integration) so I didn't post any pictures.

Yes. I plan to bondo the open part under the x-bow handle so all the glue isn't showing. After bondo-ing, I can take off the strings too, they're just for support.

~ompa

Edited by ompa, 01 July 2005 - 06:09 PM.