#1
Posted 28 March 2005 - 12:50 AM
#2
Posted 28 March 2005 - 12:54 AM
Edited by Richomundo, 28 March 2005 - 12:54 AM.
#3
Posted 28 March 2005 - 01:13 AM
#4
Posted 28 March 2005 - 08:43 AM
I just swichted to stefans and cpvc. You won't beleive how much more power mine gets.
Bigger than rugby
Bigger than snowboarding
Bigger than surfing.......Paintball
#5
Posted 28 March 2005 - 09:29 AM
#6
Posted 28 March 2005 - 12:13 PM
#7
Posted 28 March 2005 - 01:29 PM
Edited by LordoftheRing434, 28 March 2005 - 01:31 PM.
"I bluff it. I don't throw my weight around and say I know what I'm doing." ~ Mick Jagger
#8
Posted 28 March 2005 - 01:38 PM
No, cut the tip off and sand the ridges on the inside down. Also "I don't have access to brass" is not an excuse. There are plenty of other barrel materials like pvc,cpvc and petg.Yes, keep the drawing tip of the crayola barrel on.
I don't have access to brass barrels either,
Bigger than rugby
Bigger than snowboarding
Bigger than surfing.......Paintball
#9
Posted 28 March 2005 - 04:37 PM
#bro
#10
Posted 28 March 2005 - 06:50 PM
"Don't do that mod! Don't! I did it recently, and it adds a little more power (just because the barrel shakes arround) and decreases accuracy. After asking Falcon why it happened, he told me that one of his clan mates wrote that mod, and that it is horrible. He told me to simply put everything back the way they were. I'm suprised he didn't take it down. Try to find some barrel material, but if you can't, the stock barrel on the NF is perfectly fine as long as you do everything else. I hope I helped.
DaViS"
QUOTE ("Devious") |
2. Laugh like a maniac as you pummel them with your balls. |
#11
Posted 28 March 2005 - 08:15 PM
Question 2: To silence my gun, you guys suggested to place foam near the back of the plunger head. Could you please show me a little bit clearer where? I'm still a little confused.
Thanks a bunch.
#12
Posted 29 March 2005 - 02:04 PM
#bro
#13
Posted 29 March 2005 - 04:51 PM
Exactly, smart one. CPVC is what you should do! I don't reccomend the Crayola barrel for the poor acuracy. I do reccomend CPVC, as my NF is now CPVC barreled.Davis, well now my barrel doesn't shake and it goes alot farther, today, i put on a cpvc mod and i tried to make it look like an mp5, I think it's worth the 10 min to do it.
DaViS
QUOTE ("Devious") |
2. Laugh like a maniac as you pummel them with your balls. |
#14
Posted 29 March 2005 - 11:09 PM
Edited by Greek Assassin, 29 March 2005 - 11:10 PM.
QUOTE (Arcanis @ Apr 9 2005, 12:02 AM) |
When I insert a dick, nothing happens. |
#15
Posted 30 March 2005 - 03:21 PM
you're talking about the little circular thing the size of a quarter? yeah when i did my first mod to the nite finder i accidentally flipped that thing around, and i lost all my power, so i suggest keeping it the same way... it was like it was even worse than unmodded. If you wanted to, you could put a big hole in it, and keep the 2 rings. but don't take it out because that round piece is necessary to stop the plunger action.Question 1: The little cap closest to the plunger casing, does it matter if I flip it inside out?? The part originally facing the rear end of the gun has a little nest where I can easily wrap my crayola tip with tape and fit it in. Do you think I can do that or do I have to keep the cap facing the right way?
Edited by Richomundo, 30 March 2005 - 03:22 PM.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users