2 replies to this topic

[navy seal]

I was trying to make a shotgun but while I was experimenting I discovered a new clip design. It is similar to Thirst's. Take an airtech 2000 and glue a pieice of 1/2 pvc to the air tank. I used a 6" peice.(the longer you make it the more darts it can hold but it will get less range) Then get a 1/2" ball valve and put it on the end of the barrel. To load you take the ball valve off and put multiple stefans in. Then put the ball valve back on and pump then fire. It should fire only one dart at a time. The only problem is you have to fire slanted down.This may not work if your stefans are lose in the 1/2" ball valve. My stefans were pretty tight. If you put this on a semi auto at2k it could be deadly.

[southpaw]

Sounds like a RSCB barrel. Can stefans fit thru an open 1/2" ball valve?

Edited by southpaw, 31 March 2005 - 09:41 AM.

[Sqiggs89]

Sound's cool, but i'd need to see pics and if it were semi auto i agree that would kick all ass