7 replies to this topic

[Phantom]

Ok, here is the airtech 2000 single barrel mod. First, take all the screws out and get that piece of plastic by the pump off. now, plug the pressure release valve with your hot glue gun. Next, hot glue a crayola barrel directly onto the airtank. you may need to cut part off the end of it to make it fit over the airtank. Put it all back together and you're done. I might be able to get pictures up soon but for now i can't. bye

[ACLakeside]

If you think its good with a crayola on, rip off the crayola and try an 8-inch brass, petg, or cpvc. It will be much better(ranges of 90' - 100' flat)

[NerfMonkey]

I did this a while back, but then I checked out Falcon's website, The Den of Foam, and found that by slipping some Sch. 40 1/2" PVC over the Crayola, you can increase accuracy a lot. Just so you know, this has been done many times before. Good luck with your Air Tech.

Edited by NerfMonkey, 26 March 2005 - 06:46 PM.

[stanpig]

Has anyone ever tried to roll up construction paper to the perfect size and use it as a barrel? I did this and it worked great!

[NerfMonkey]

Wow. I never would've thought of that. It sounds flimsy, is it? That's a good idea if it works.

[stanpig]

Yeah its pretty flimsy but I wrapped it in duck tape to make it sturdy.

[Phantom]

I can't get brass or petg. I'm trying to get brass, but i cant find it anywhere. if i cant find it, I'll order some online.

[navy seal]

You could use pvc or cpvc.