4 replies to this topic

[MysticFalcon182]

I just want to know if my friend's AT2K is gay or if it's normal...

While modding my friend's AT2K, the air hose which connects to the container holding the liquitron shit coming from the pump broke off... The cap wouldn't unscrew and the whole thing just broke off, rendering the whole damn gun useless...

Anyone else have this problem?

~Mystic~

[cxwq]

You mean, while trying to disconnect the air hose you broke it?

The passive use of "broke" here is confusing to me.

Run a new air line directly from the pump to the tank.

[LiKnSmAkScOmIn]

That happened to me once when i integrated my AT2K & my PC, except the liquitron disconnected from the air tank thingy.I disconnected the old ube from the pump, but when i connected the tubing it had some leaks.How a i supposed to connect the tubing and seal it???

[GandalfInArmor]

I tried many methods; super glue, epoxy, hot glue, and prolonged cursing. However I ended up buying some small hose clamps that would clamp the tubing onto the opening and make a nice seal. That coupled with super glue did the trick just nicely. Good luck.

[cxwq]

I push the tubing completely over the barb and then run superglue around the end of the tubing so that it gets pulled into the joined area. This works extremely well until you want to remove the tubing again.