Jump to content


Cpvc Crossbow

No replies to this topic

#1 navy seal

navy seal


  • Members
  • 281 posts
  • Location:PA

Posted 23 March 2005 - 01:54 PM

I just went and got stuff to make stefans. I'm not new I just always used stock darts. I changed my crossbow from crayola and pvc to cpvc.

What you need:
16 in. of cpvc
2 cpvc couplers
hot glue
screw driver

Open up the crossbow. Mine was already modded before so if yours isn't you need to take the bow off and take out the yellow tube and barrel. Take the plunger tube and wrap tape around the nozzle until a cpvc coupler fits on it. Then glue it and wrap it in tape. Next cut 1 and 1/2 inches of cpvc and stick it in the coupler and glue it on. Get the other cpvc coupler and put it on the cpvc and glue it on. Then cut your barrel. I'm using 12 inches of cpvc. You may need to rotate the plunger tube to get your barrel exacty straight.

I'm still getting used to putting the dart in the back of the barrel and not the front of the gun like with a crayola. This gun is definity my primary.
  • 0
Played in 110 countries
Bigger than rugby
Bigger than snowboarding
Bigger than surfing.......Paintball

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users