1306 replies to this topic

[nate the great]

Here is my lastest work:

Ranges over 100 feet and is extremely acurate. You have to be a real man to prime this all the way.

[louiec3]

It is super duper comfortable. Write-up will be soon...

[cheesypiza001]

WIP:

[shadow archer]

That LpL looks comfortable.

[louiec3]

Mehku's +bow is about to get sexier...

[Ryan201821]

Kane's collection



Sweet new rockets I found at TRU. It comes with a shitty push pull gun, but it works awesome on a 4B. 80' flat and very far angled.



Tornadobow's little cousin. Far from completed, but at least it works. Shoots really far.



Ice9's HAMP made by Kane



Super sweet push pull water gun that Kane brought over. 1.5" couplers fit directly over the plungers after you pull off the stupid orange cap. These things get a ridiculous seal. With both hoppers it shoots roughly 4-8 darts every time you push it forward. Awesome.



Better look at the plunger.



SuperHAMP is finally finished.



Last but not least, my brother made his first HAMP. It's insane, yo.



Brought to you by the Cancer Shack.

[Demon Lord]

Acquired at the March 27th MN war, now it is completed. 5 ft hopper clips with 4ft long PETG barrels on a double action OMFGHAMP piston system. This thing kicks ass.

[Zmandudesk82]

A Mini HAMP I made a while ago. It's way different than Kane's version, but the manual plunger works the same. It's very comfortable, gets unbelievable ranges, and has a built in RSCB.

[Ice Nine]

Ryan should've linked these in his post, but here's HAMP war footage from the last mod party.

Part I

Part II

[Ambience 327]

Sweet new rockets I found at TRU. It comes with a shitty push pull gun, but it works awesome on a 4B. 80' flat and very far angled.

You forgot to mention that the sweet whistle they emit in flight. I have four of those push-pull rocket launchers, had them for years. They used to be available at Wal-Mart too, though I haven't seen them there in a while. I've converted one of the push-pull parts to a dart shooter, and it gets fairly decent range for very little effort (either modding or pushing), and of course the range goes up the faster you push (though accuracy drops a bit).

[wohnson89]

I call it my lil' hand cannon



It gets about 70-80 ft

Edited by wohnson89, 05 April 2010 - 02:14 PM.

[Lt Stefan]

Some recent contracts:





PVAT with CLB



Breeches!

If you want something, pm me.

[Mehku]

Do you want....to metal? (If you figure out where that quote came from, you get a cookie)

I give you my aluminum-polycarbonate hybrid +Bow: Al. Yes, I named it Al. (If you don't know what Al stands for in real life, you need to pay attention in chemistry class.)











If this thing ever breaks, I will be super surprised; the aluminum plates are fucking rock solid compared to the old ploycarb ones. I would suggest that you all upgrade your side plates to aluminum so that you guys don't have to worry about them breaking.

The aluminum side plates and the +Bow were both made by Louiec3, so if you want one, talk to him.

[Ryan201821]

+bow NF



Primed

[AquaPsudo]

The M.O.R.P. (manual operated rotary plunger)
WIP
This works off the principle of the combustion engine and steam engine.
It will be fitted with a hopper clip and power drill motor, making it fully automatic.

Video

[IMG]http://img401.imageshack.us/img401/462/nerf016.jpg

Edited by AquaPsudo, 09 April 2010 - 12:04 AM.

[louiec3]

I finished my tornadobow. It took too long.



Group picture! You should buy one...

[louiec3]

I'll give you three guesses as to who this is for...

[Ryan201821]

New Portable MegaHAMP built last night.





Shoots three to five darts at once. Ranges are great. This version was made from thinwall, so it's muuch lighter.

Don't buy Nashua duct tape. It smells like burnt poop. Literally.

Edited by Ryan201821, 24 April 2010 - 03:47 PM.

[cheyner]

DA MAMP (Dual Action Medium Airflow Manual Plunger)



Push the handle to fire a shot, then pull it back to fire another.
Uses 2 10 shot RSCB's that vaccume load.
Built to prove that the design works, fires in the 50 ft range.

[Genises]

Heya i'm new to nerf I bought some PVC and just built this

http://i259.photobuc...1000/001334.jpg

Someone somewhere has probably come up with this design though...

(forgot to add i took the picture with my laptops webcam by lifting my laptop into the air and pointing it at my bed hence the image quality is terrible)

Edited by Genises, 26 April 2010 - 11:26 AM.

[nate the great]

My wooden SNAP. Shoots farther then my +bow and is a lot quieter. I'm also working on my version of the SNAP crossbow.

Edited by nate the great, 26 April 2010 - 03:48 PM.

[cheesypiza001]

I used MAPP gas to heat up the PVC so that I could bend it to the desired angle and then I just attached an elbow for the vertical shoulder support (stock). The bent PVC is bolted to the bottom of the handle.

[louiec3]

I made a gun for atomatron. He designed it; I built it.

It is a lever action gun, and the trigger is just amazing.

[Ryan201821]

RSCB Hamp

I fit 1/2" PVC in a random pool noodle that fit inside the plunger tube with force. It silences the plunger from hitting what would normally be there, and it's cheaper than a bushing.



New method for guide. I wrapped some thick felt stuff Kane had in a circle and taped it to the plunger. Super smooth action.



Later I'll add a magnet at the back of the barrel so it will act just like a hoppered gun.

[Ryan201821]

My rainbowtastic arsenal.