17 replies to this topic

[Sinfil]

Okay, I spent the better part of two days working on this for my teammate Pratt. It is a strapped Rapid Fire 20 wit an AT3K pump, with a coupler-modified Nite Finder attached to the bottom. Pratt recently added 3 Secret Strike Pocket Blasters to the side. Here's a picture.



Post your suggestions on improving it and comments here.

It takes 27 pumps to prime.

Yes, the overpressure release valve in the AT3K pump is plugged.

~Sinfil

[navy seal]

It looks nice except for the pocket blasters. Take them out of there shells and lay them flat on the the sides or the top. If you wouldn't have put the nite finder upside down you could us it as a second handle.

[Sinfil]

If you wouldn't have put the nite finder upside down you could us it as a second handle.

I wouldn't be able to cock it then . But thanks for the SSPBs suggestion. We'll try it.

~Sinfil

[okto]

*Poseidon, perhaps?

[Sinfil]

Nope. I kinda mispelled it on the title; it should be "Posiden". It used to be "Poseidon" until...

Posiden->Poseidon
Fang Shot->Laser Fang
Extendo-blast->Expanda-Blast(Me replying to Pratt)

I spell it Posiden because its a rip-off of a God, and its probably some other thing that copywrited.(Pratt)

Here's the thread that has it.

~Sinfil

Edited by Sinfil, 28 February 2005 - 02:43 PM.

[okto]

That...doesn't make any sense. It's Poseidon, it's the name of a Greek god, it isn't copyrighted. Just spell it right

[Talio]

I think all your missing is a Monkey and a 2k.

USE IT JACK!

Talio.

[okto]

Kitchen sink?

[Grumschnitz]

mmmm, niceness, personally I'd ditch the pocket blasters and add the guts of another nightfinder in their place. All that pumping has gotta get tedious after a while.

[okto]

On that note, you should add a bar or something across the three SSPB pumps so they can be pumped all at the same time.

[Sinfil]

The SSPBs have to stay. Pratt won't take them off.

We have tried the bar thing, but it kept on braking. We also tried a bar on the "trigger", but it broke off too. We may try again though. Thanks for teh suggestions.

~Sinfil

[last man standin]

'coo! Awesome job!!!May I suggest barrel-modding the sspb's?

[AirApache]

I think Talio was referring to Groove's DbF comic, which was the first thing that came into my mind...that's all I have to say.

[FIDO]

I love that integration, but a AT2K would be a perfect addon for it. How do you hold that beast?

[navy seal]

You said it has an Air tech 3000 pump, but on the side of the gun there is a Rapid Fire 20 pump.

[Sinfil]

You said it has an Air tech 3000 pump, but on the side of the gun there is a Rapid Fire 20 pump.

? Where? On the bottom picture, the AT3K pump is stuck in it's holding place on the right side, made out of 1" CPVC coupler and endcap.

EDIT: Oh, I gotcha. What I did was meld the top of teh RF20 pump onto the top of teh AT3K pump for a grip.

last_man_standin_-would CPVC be an okay barrell replacement?

FIDO-Like you would a reular RF20. Sling the strap over your neck, right hand on trigger, left hand either under the NF or on the SSPBs. You shoot the NF with your right middle finger.


Any suggestions on where to put the 2K?

~Sinfil

Edited by Sinfil, 28 February 2005 - 08:26 PM.

[FIDO]

You shoot the NF with your right middle finger.

I liked that trigger design.

I'd suggest taping the AT2K on the opposite side of the pump.

[okto]

We have tried the bar thing, but it kept on breaking. We also tried a bar on the "trigger", but it broke off too. We  may try again though. Thanks for teh suggestions.

How did you attach them? Glue most likely won't cut it, you'll have to use screws or pins of some sort.