Stefans And Pegs Question.
#1
Posted 21 February 2005 - 09:07 AM
-CTA
20 posts(woot!!... never mind...)
Living in the big machine
#2
Posted 21 February 2005 - 10:11 AM
#3
Posted 21 February 2005 - 10:50 AM
I've had mixed results with holes in the back of the stefans. Most of this is due to the fact that I usually make darts in haste, so the quality is usually poor before I even begin that step. The way most people put holes in the back of stefans is by using a soldering iron; you can get them for about $8 from a Hardware store if I remember correct. If you do try to make holes, I would make them about the diameter of the pegs. Any wider and the darts tend to break down faster.
<a href="http://www.albinobla.../flash/posting" target="_blank">Posting and You</a>
#4
Posted 21 February 2005 - 11:05 AM
-CTA
Living in the big machine
#5
Posted 22 February 2005 - 08:46 PM
Aim toward your goals...Quicken your stride...
With great power comes great responsibility.
#6
Posted 23 February 2005 - 12:47 AM
#7
Posted 23 February 2005 - 01:19 AM
#8
Posted 23 February 2005 - 06:15 AM
As well follow cxqw's warning above. Certain guns have different layouts but it's all up to you if you want to do it. I took out the peg in my nightfinder and I've gotten an extra bout 10-15 ft. for range. I used stock and stefans with my little brother and some firends. If I can, then I'll post everything on my first nerf war.
IF YOU TAKE OUT THE PEG, YOU WILL INCREASE YOUR AIRFLOW AND STILL
BE ABLE TO SHOOT STOCKS AND STEFANS.
*Note:* I performed this test using a Nightfinder Ex-3.
Edited by Streetz, 23 February 2005 - 06:18 AM.
#9
Posted 23 February 2005 - 05:33 PM
"the56ace,
Your member account at NerfHaven has been temporarily suspended because I don't like you."
-cxwq
If ignorance is bliss, our president must be ecstatic.
#10
Posted 23 February 2005 - 07:03 PM
Sorry for the acronym, I'm generally against those.I hate to be stupid, but Cxwq what does YMMV mean?
In any event, Google is your friend.
#11
Posted 23 February 2005 - 08:06 PM
Edited by NerfMonkey, 23 February 2005 - 08:42 PM.
#12
Posted 27 February 2005 - 02:04 PM
Edited by PissBacon, 27 February 2005 - 02:05 PM.
#13
Posted 27 February 2005 - 02:50 PM
#14
Posted 27 February 2005 - 03:21 PM
Thanks.
-CTA
Living in the big machine
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users