what is the best length for a PETG barrel on a BBB? its got 2 or 3 springs in it i can't remeber
Good Length Of Barrel
Started by silent mercenary, Apr 23 2003 11:23 AM
5 replies to this topic
#1
silent mercenary
-
- Members
- 158 posts
Member
Posted 23 April 2003 - 11:23 AM
I will not walk, so that a child may live!
- Master Shake
- Master Shake
#2
Spoon
-
- Founders
- 560 posts
Meh.
Posted 23 April 2003 - 02:03 PM
Two or three springs in a BBB? Good God.....
Two roads converged in the woods, and I took the one less traveled......and now I don't know where the hell I am.
#3
NerfManiac
-
- Members
- 214 posts
Member
Posted 23 April 2003 - 05:03 PM
Two to three springs may help it achieve great range, But the amount of resistance that you get in that many springs is too much. The pressure will eventually break the handle which is a major part of the bbb's internal structure. This is what happened to my bbb. I wouldn't PETG a bbb, you should crayola it. But to answer your question I would make it about 6 in.
You use your tongue prettier than a twenty dollar whore.
- Taggart (Blazing Saddles)
- Taggart (Blazing Saddles)
#4
silent mercenary
-
- Members
- 158 posts
Member
Posted 23 April 2003 - 06:27 PM
ok i took out one of the springs but barrel length?
I will not walk, so that a child may live!
- Master Shake
- Master Shake
#5
cxwq
-
- Founders
- 3,634 posts
Member
Posted 23 April 2003 - 11:10 PM
If you're going to use PETG, make sure your darts are pretty snug fitting and use about 5".
<meta name="cxwq" content="mostly water">
#6
silent mercenary
-
- Members
- 158 posts
Member
Posted 24 April 2003 - 12:04 PM
thanx for the advice 
I will not walk, so that a child may live!
- Master Shake
- Master Shake
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
