Jump to content


Photo

Big Salvo/at2k Integration

need help

4 replies to this topic

#1 gordon

gordon

    Member

  • Members
  • 59 posts

Posted 05 February 2005 - 03:08 AM

My basic idea is to have an awsome pointman weapon. It will be a loser/assault rifle. The Big Salvo, I understand, is a great assault rifle and I just purchased one. It would be cool to integrate an AT2K on top of it as a loser rifle. I tried this thread on NHQ but I really think you guys can do better. What type of barrels should I use on the Big Salvo and the AT2K valve? Thanks.

Gordon
  • 0
kill or be killed

#2 southpaw

southpaw

    Member

  • Members
  • 143 posts

Posted 05 February 2005 - 07:56 AM

Well you could PETG the big salvo. Veggieboy did a write-up on the 3M site. http://freewebs.com/mmmich/ . As for the 2K you should probably single-barrel it. try a 10 in. barrel. You should try to get the 2K pump close to the big salvo pump and make them face in the same direction so you can easily switch from one to another. And put a key-ring on the 2K firing pin so you can shoot it easily.
  • 0
Sup?

#3 gordon

gordon

    Member

  • Members
  • 59 posts

Posted 05 February 2005 - 10:28 AM

Oops. Sorry I forgot to mention that I don't have any PETG and don't have any access to any (unless anybody on here would sell me some). I already knew all the stuff about single barreling, key rings, and where to put the pumps. All I want to know is what kind of barrel material should I use on the AT2K and what kind should I use on the Big Salvo?
  • 0
kill or be killed

#4 The Large Moose

The Large Moose

    Member

  • Members
  • 254 posts
  • Location:Florida

Posted 08 February 2005 - 11:14 AM

Depends on what darts. If you are using Micro Stefans (naturally) you could use CPVC for the barrels. Basically, it is nearly the same as PETG and brass, but it is lighter than brass, but heavier than PETG. CPVC can be found at Home Depot I presume.

If using Zeros, Stefan Megas, or Nerf Micros, you could use PVC. SCH 80 is the recommended type, either that or SCH 40. But you probably already knew that.

Edited by The Large Moose, 08 February 2005 - 11:14 AM.

  • 0
QUOTE (Arcanis @ Apr 8 2005 @ 04:02 PM)
When I insert a dick, nothing happens. Wierd.


"Ever have deja vu and amnesia at the same time? I think I have forgotten this before." -Unknown

#5 Airsoft999

Airsoft999

    Member

  • Members
  • 342 posts

Posted 10 February 2005 - 05:53 PM

Depends on what darts. If you are using Micro Stefans (naturally) you could use CPVC for the barrels. Basically, it is nearly the same as PETG and brass, but it is lighter than brass, but heavier than PETG. CPVC can be found at Home Depot I presume.

If using Zeros, Stefan Megas, or Nerf Micros, you could use PVC. SCH 80 is the recommended type, either that or SCH 40. But you probably already knew that.

SCH 80 is for micro stefans.
  • 0


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users