Posted 21 April 2003 - 03:40 PM
1. Glue a 1.5" piece of 1/2 CPVC to the air tank
2. Glue a 1/2 CPVC coupler to that
3. Attach a 6" barrel of 1/2 CPV to the coupler
With this mod, I hope I can remove the barrel, and put in the dart through the back. From what I've read, this is a breach load, but I'm not sure. My question is, are there any flaws? Is there something else I should do before or during the modding procedure? I just want to make sure I haven't forgotten anything.
Posted 21 April 2003 - 04:01 PM
You know you can 4-barrel mod it and the assembly should work just fine. The most likely cause of your out-of-box problems is those pegs/springs inside the barrel that only let air through if it's loaded. Once the barrels are cut down to stubs there's not really much that can go wrong with the assembly.
Posted 21 April 2003 - 05:59 PM
Posted 21 April 2003 - 06:09 PM
PVC won't work on the 2k because the barrels are too close together. Brass, CPVC, and PETG are the only options I know of for the 2k.
Posted 21 April 2003 - 07:30 PM
So, PVC or CPVC?
Posted 21 April 2003 - 07:42 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users