1 reply to this topic

[FBB]

This is my TT mod whitch uses a Cpvc coupler/barrel arrangement, which I have not seen on the forums before. So here it is.

Here's a picture of the way I cut down my TT's case, I did this because I thought it's case was pretty big for a pistol. You can do this if you want.





Here's your plunger, you can stretch the spring if you want but I would not recomend it. I suggest replacing the spring or adding bands or a bungee cord.



Here's a picture of the plunger tube, as you can see there's 2 pieces.



Glue the second piece onto the tube like this.



Now onto your barrel arrangement. As I stated above I used a Cpvc coupler/barrel set up. Here's how you glue the coupler.



There it is your done, I added some E-tape for extra support. For a your barrel I'd recomend 4.5-6 inchs, I'm using 5 and I'm getting around 60 feet.

Edited by FBB, 11 January 2005 - 10:45 PM.

[last man standin]

I snub nosed it like you did, but I just trashed the innards. Im gonna put nf guts in it, and a barrel mod to the nf parts as soon as i get my material saturday.