12 replies to this topic

[Lardboy]

I've been nerfing for a couple of months and I'm wanting to do a barrel mod for my nite finder but have no clue how to find a pvc barrel. Where can you get some?

[Diego]

Go to hardware stores and search for it in the plumbing section. You'll probably want to get 1/2 inch PVC. Good luck on your mod.


--Diego

[IronRhino]

Go into your backyard and start digging. Eventually you'll see a white tube. Rip it out and viola! (Ignore the flood of water; it's normal)

[Ironman]

That of you can rip it out of the ceiling in you down stairs.

[airtight]

I've been nerfing for a couple of months and I'm wanting to do a barrel mod for my nite finder but have no clue how to find a pvc barrel. Where can you get some?

Look at home depot or Lowes. If they don't have any toilet all the way.

[nerfboi]

WTF?! you've been nerfing for a few months and you still dont know where to get it?! have you been to a hardware shop? got to lowes its much cheaper( but only in my place)

[Ironman]

Easy there. He was just asking a question even though it has been answered before. You have a short tember.

[cxwq]

WTF?! you've been nerfing for a few months and you still dont know where to get it?! have you been to a hardware shop? got to lowes its much cheaper( but only in my place)

I don't like you much at all.

Start capitalizing properly.

[Ironman]

When was he allowed to start posting again anyway.

[okto]

Still though...not knowing where to get PVC? *shakes head* Kids these days...

[nerfboi]

well im stupid(not mental)

[Half Newb Half Nerfer]

...

[AirApache]

Sorry for posting in this *gasp* week old topic, but I'd like to point something out that I've noticed a lot on the forums recently. [highly off topic, sorry for hi-jacking]

If you can't contribute at least one helpful bit to the topic, please refrain from posting. I know you all are anxious to get the highest number of post counts in order to attempt to prove you are not a newb, but a better way is just to make all of your posts respectable and with some value. Also, try not to post the same thing as the previous 4 people did.

To make sure I'm not a hypocrite, here are my two cents:

You can basically get it at any home improvement or hardware-type shop. I use Ace Hardware myself, I don't know if you have one nearby. For the NiteFinder, I'm not sure whether you want to use a PVC barrel mod (unless you have some creative idea, which you're pretty much obliged to share with us), but rather a brass/PETG mod. Brass can be found, again, at pretty much all hardware stores, and you can search around the site for various places that sell PETG. If you do get brass, others recommend 17/32" diameter brass (K&S brand), but I personally use 9/16".

AA