#1
Posted 20 December 2004 - 09:30 PM
#2
Posted 20 December 2004 - 10:23 PM
What I did to mine is saw off an inch of the orange barrel, and then construct a new barrel using about 6 inches of 1/2 PVC, and 8 inches of brass. Wrap a little duct tape around the brass and stick it in the PVC, it should be a top fit, and the two extra inches should stick over the top. Attach the PVC into a 1/2 in. PVC coupler. Said coupler and barrel system will fit right over the orange stock barrel. Just twist it a bit.
#3
Posted 21 December 2004 - 03:18 AM
Respringing it can help, but it's so sodding loud as it is...it'll just get louder.
Sawing off the part of the case where the arrow holders live is a good cosmetic mod, since that part's weak like it wants to fall off anyway.
Other than that, there's not a whole lot you can do to the BBB. Barrel it and you've got almost all the performance that gun has to offer.
#4
Posted 21 December 2004 - 08:41 AM
#5
Posted 21 December 2004 - 04:41 PM
#6
Posted 21 December 2004 - 06:31 PM
I also have a good nf integration for ithe bbb. saw off the front handle completely, so you are looking into a hole into the gun, and saw about two inches off of the nf's handle. I know this will be killing the laser light, but who actually uses that anyway?Then stick whats left of the nf handle in the hole left from the bbb front handle, after sawing off the ammo holders, that is.epoxy and electrical tape it up, and you have a nf bbb. (P.S. You might want tho mod the nf to cock from the side, or just put it far up on the bbb so you dont have trouble cocking it.
Edited by last_man_standin_, 21 December 2004 - 06:40 PM.
#7
Posted 21 December 2004 - 07:10 PM
WTF, the foam on a Nerf Mega is 5/8", while the rubber suction cup measures in at 3/4".Actually, brass 9/16 works perfectly with stock megas.
5/8" foam = 10/16" which is too bulky for 9/16" brass.
3/4" rubber suction cup = 12/16" which DOES NOT FIT in 9/16" brass.
The math just doesn't add up my noobish friend. Your claims are invalid.
Edited by Jangadance, 21 December 2004 - 07:15 PM.
#8
Posted 21 December 2004 - 07:25 PM
#9
Posted 22 December 2004 - 06:56 AM
Edited by Nerfnewbie, 22 December 2004 - 06:59 AM.
(O.o)
(> < )
Behold. Helping Bunny on his way, one signiture at a time.
#10
Posted 22 December 2004 - 03:13 PM
#11
Posted 22 December 2004 - 03:17 PM
You said stock megas, not mega stefans.Actually, brass 9/16 works perfectly with stock megas.
Anyways, it should be 5/8" diameter foam. If that is still the case, you bought a larger size brass than 9/16".
#12
Posted 22 December 2004 - 06:23 PM
#13
Posted 22 December 2004 - 08:07 PM
My original comment about megas was aimed at Thief, cos he was confused about which ammo is called what.
#14
Posted 30 December 2004 - 01:53 PM
Edited by Thief, 30 December 2004 - 01:58 PM.
#15
Posted 30 December 2004 - 04:57 PM
If you did make megas, 9/16" brass is a terrbile choice for a barrel. Megas are 0.63" diameter, the ID of 9/16" brass is 0.53", that's a pretty tight fit.
#16
Posted 30 December 2004 - 05:55 PM
#17
Posted 30 December 2004 - 08:29 PM
(O.o)
(> < )
Behold. Helping Bunny on his way, one signiture at a time.
#18
Posted 30 December 2004 - 09:35 PM
#19
Posted 31 December 2004 - 12:11 AM
Okay first of all, there is such thing as a macro.There's no such thing as a macro,
Straight from Merriam Webster:
Etymology: short for macroinstruction
: a single computer instruction that stands for a sequence of operations
Owned.
Second of all, which of these sounds the most like macro?they're called Megas, like I said.
1. Mega
2. Micro
3. Nano
Mega, macro? No. Nano, macro? It's closer than mega was.
Let's see... Micro, macro? Yup, it's the closest. He meant micro, not mega. It was just a small mistake, no biggie.I think he might have ment micros.
His account name is Thief, what'd you expect?Thief!You didn't make your own stephens!You borrowed mine!You thief!
Edited by MattPaintballer, 31 December 2004 - 12:15 AM.
"the56ace,
Your member account at NerfHaven has been temporarily suspended because I don't like you."
-cxwq
If ignorance is bliss, our president must be ecstatic.
#20
Posted 31 December 2004 - 01:42 AM
Edited by gordon, 31 December 2004 - 01:43 AM.
#21
Posted 31 December 2004 - 02:06 AM
I know that, dork. Why would anyone think he or I meant a computer instruction?macroinstruction
: a single computer instruction that stands for a sequence of operations
If you're gonna dissect a post, could you at least make it over something worthwhile?
#22
Posted 09 January 2005 - 01:16 PM
#23
Posted 09 January 2005 - 02:01 PM
Why dont you have anything to drink!?
Choose one, making you better feeling!
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users