Jump to content


Photo

Bbb Mods

... List them here

22 replies to this topic

#1 Thief

Thief

    Member

  • Members
  • 8 posts
  • Location:My Mother's house

Posted 20 December 2004 - 09:30 PM

The BBB is the favorite weapon of mine, and I am looking to mod it to make it more powerful, and accurate. So far I have removed the wings, and enabled it to shoot Macros. If you know of any other way to mod it, can you tell me here.
  • 0
You can lead a dog to China Town, but you can't be sure that it will be there in about an hour.

#2 Whiplord

Whiplord

    Member

  • Members
  • 63 posts

Posted 20 December 2004 - 10:23 PM

There's quite a few variations.

What I did to mine is saw off an inch of the orange barrel, and then construct a new barrel using about 6 inches of 1/2 PVC, and 8 inches of brass. Wrap a little duct tape around the brass and stick it in the PVC, it should be a top fit, and the two extra inches should stick over the top. Attach the PVC into a 1/2 in. PVC coupler. Said coupler and barrel system will fit right over the orange stock barrel. Just twist it a bit.
  • 0

#3 okto

okto

    Member

  • Members
  • 590 posts
  • Location:tulsa OK/fort worth TX

Posted 21 December 2004 - 03:18 AM

You mean megas. Mod it to shoot micros or micro Stefans and you'll see a big performance increase.
Respringing it can help, but it's so sodding loud as it is...it'll just get louder.
Sawing off the part of the case where the arrow holders live is a good cosmetic mod, since that part's weak like it wants to fall off anyway.

Other than that, there's not a whole lot you can do to the BBB. Barrel it and you've got almost all the performance that gun has to offer.
  • 0

#4 Ender

Ender

    Member

  • Members
  • 207 posts

Posted 21 December 2004 - 08:41 AM

You can always attach a nf or lnl to the front handle, but rather than go through the trouble of sawing the thing off. I just tape an nf to the front handle and it works nicely.
  • 0

#5 Whiplord

Whiplord

    Member

  • Members
  • 63 posts

Posted 21 December 2004 - 04:41 PM

Do you mean that I mean megas? How could I with the brass? 9/16ths
  • 0

#6 last man standin

last man standin

    Member

  • Members
  • 299 posts

Posted 21 December 2004 - 06:31 PM

Actually, brass 9/16 works perfectly with stock megas.
I also have a good nf integration for ithe bbb. saw off the front handle completely, so you are looking into a hole into the gun, and saw about two inches off of the nf's handle. I know this will be killing the laser light, but who actually uses that anyway?Then stick whats left of the nf handle in the hole left from the bbb front handle, after sawing off the ammo holders, that is.epoxy and electrical tape it up, and you have a nf bbb. (P.S. You might want tho mod the nf to cock from the side, or just put it far up on the bbb so you dont have trouble cocking it.

Edited by last_man_standin_, 21 December 2004 - 06:40 PM.

  • 0
Black Masks & Gasoline

#7 Jangadance

Jangadance

    Member

  • Members
  • 676 posts

Posted 21 December 2004 - 07:10 PM

Actually, brass 9/16 works perfectly with stock megas.

WTF, the foam on a Nerf Mega is 5/8", while the rubber suction cup measures in at 3/4".

5/8" foam = 10/16" which is too bulky for 9/16" brass.
3/4" rubber suction cup = 12/16" which DOES NOT FIT in 9/16" brass.

The math just doesn't add up my noobish friend. Your claims are invalid.

Edited by Jangadance, 21 December 2004 - 07:15 PM.

  • 0
"The 'dance goes on..."

#8 Airsoft999

Airsoft999

    Member

  • Members
  • 342 posts

Posted 21 December 2004 - 07:25 PM

Ouch. Hunter did a breech mod that works well- you might want to search for that.
  • 0

#9 Nerfnewbie

Nerfnewbie

    Member

  • Members
  • 130 posts

Posted 22 December 2004 - 06:56 AM

Robbie,the BBB is your only weapon! ;) :lol: :lol:Not your favorite! :D

Edited by Nerfnewbie, 22 December 2004 - 06:59 AM.

  • 0
(\_/)
(O.o)
(> < )

Behold. Helping Bunny on his way, one signiture at a time.

#10 last man standin

last man standin

    Member

  • Members
  • 299 posts

Posted 22 December 2004 - 03:13 PM

Then the foam I make my mega stefans must not be the right size, but it seems to work for me...
  • 0
Black Masks & Gasoline

#11 Jangadance

Jangadance

    Member

  • Members
  • 676 posts

Posted 22 December 2004 - 03:17 PM

Actually, brass 9/16 works perfectly with stock megas.

You said stock megas, not mega stefans.

Anyways, it should be 5/8" diameter foam. If that is still the case, you bought a larger size brass than 9/16".
  • 0
"The 'dance goes on..."

#12 last man standin

last man standin

    Member

  • Members
  • 299 posts

Posted 22 December 2004 - 06:23 PM

Whatever...I guess im just confused...or stupid...whatever.
  • 0
Black Masks & Gasoline

#13 okto

okto

    Member

  • Members
  • 590 posts
  • Location:tulsa OK/fort worth TX

Posted 22 December 2004 - 08:07 PM

last_man, if you're uing 9/16" brass, you're using 1/2" FBR. So you're making micro Stefans. No mega-sized anything will fit inside 9/16" brass.
My original comment about megas was aimed at Thief, cos he was confused about which ammo is called what.
  • 0

#14 Thief

Thief

    Member

  • Members
  • 8 posts
  • Location:My Mother's house

Posted 30 December 2004 - 01:53 PM

actually, I did not get confused, I did make it shoot macros. I am now trying to make it similar to the AT 2000 by adding a revolving barel to the front cause it takes a long time to load, plus I cant gat it to shoot stephens fast, and the stephens sometimes just fall into the gun itself.

Edited by Thief, 30 December 2004 - 01:58 PM.

  • 0
You can lead a dog to China Town, but you can't be sure that it will be there in about an hour.

#15 okto

okto

    Member

  • Members
  • 590 posts
  • Location:tulsa OK/fort worth TX

Posted 30 December 2004 - 04:57 PM

No, you didn't. There's no such thing as a macro, they're called Megas, like I said.

If you did make megas, 9/16" brass is a terrbile choice for a barrel. Megas are 0.63" diameter, the ID of 9/16" brass is 0.53", that's a pretty tight fit.
  • 0

#16 gordon

gordon

    Member

  • Members
  • 59 posts

Posted 30 December 2004 - 05:55 PM

I think he might have ment micros.
  • 0
kill or be killed

#17 Nerfnewbie

Nerfnewbie

    Member

  • Members
  • 130 posts

Posted 30 December 2004 - 08:29 PM

Thief!You didn't make your own stephens!You borrowed mine!You thief!
  • 0
(\_/)
(O.o)
(> < )

Behold. Helping Bunny on his way, one signiture at a time.

#18 okto

okto

    Member

  • Members
  • 590 posts
  • Location:tulsa OK/fort worth TX

Posted 30 December 2004 - 09:35 PM

Stefans.
  • 0

#19 MattPaintballer

MattPaintballer

    Member

  • Members
  • 369 posts
  • Location:Where the slots are plentiful, and the yards are small

Posted 31 December 2004 - 12:11 AM

There's no such thing as a macro,

Okay first of all, there is such thing as a macro.

Straight from Merriam Webster:

Etymology: short for macroinstruction
: a single computer instruction that stands for a sequence of operations

Owned.

they're called Megas, like I said.

Second of all, which of these sounds the most like macro?

1. Mega
2. Micro
3. Nano

Mega, macro? No. Nano, macro? It's closer than mega was.

I think he might have ment micros.

Let's see... Micro, macro? Yup, it's the closest. He meant micro, not mega. It was just a small mistake, no biggie.

Thief!You didn't make your own stephens!You borrowed mine!You thief!

His account name is Thief, what'd you expect? :D

Edited by MattPaintballer, 31 December 2004 - 12:15 AM.

  • 0
"I think politicians are much more irritating than hippies."
"the56ace,
Your member account at NerfHaven has been temporarily suspended because I don't like you."
-cxwq
If ignorance is bliss, our president must be ecstatic.

#20 gordon

gordon

    Member

  • Members
  • 59 posts

Posted 31 December 2004 - 01:42 AM

MattPaintballer owned on that one. If you want you can see the ultimate online dispute between me and some sophomore, you are welcome to. You would have to trace it through my sight at www.xanga.com/gordon09 . It's a blog and you would have to go back through a lot of dates and stuff so I wouldn't do it. But it was like a flame war. Only not really flamming and it was very intellegent.

Edited by gordon, 31 December 2004 - 01:43 AM.

  • 0
kill or be killed

#21 okto

okto

    Member

  • Members
  • 590 posts
  • Location:tulsa OK/fort worth TX

Posted 31 December 2004 - 02:06 AM

macroinstruction
: a single computer instruction that stands for a sequence of operations

I know that, dork. Why would anyone think he or I meant a computer instruction?

If you're gonna dissect a post, could you at least make it over something worthwhile?
  • 0

#22 Precision

Precision

    Member

  • Members
  • 63 posts

Posted 09 January 2005 - 01:16 PM

Big Bad Load owns. There is a lot of room for integrations on the BBB, just not on the inside.
  • 0
Headshot every time....

#23 JSkater

JSkater

    Member

  • Members
  • 344 posts

Posted 09 January 2005 - 02:01 PM

Thanks Cpt. Obvious.
  • 0
QUOTE(Arcanis)
When I insert a dick, nothing happens.

Why dont you have anything to drink!?
Choose one, making you better feeling!


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users