Jump to content


Photo

Your Mission, If You Choose To Accept It.

Let's get this clip idea rolling

31 replies to this topic

#26 boltsniper

boltsniper

    Member

  • Contributors
  • 591 posts

Posted 22 December 2004 - 11:44 AM

Sprung Magazine
  • 0

#27 Jangadance

Jangadance

    Member

  • Members
  • 676 posts

Posted 22 December 2004 - 02:15 PM

Mmmmmm, yeah...

Speaking of sprung, that's hot.
  • 0
"The 'dance goes on..."

#28 Ironman

Ironman

    Member

  • Members
  • 448 posts
  • Location:Pennsylvania

Posted 22 December 2004 - 06:26 PM

What is that maron colored object in you clip, bolt? 4 th pic.
  • 0
Die with honor...Fight with pride...
Aim toward your goals...Quicken your stride...
With great power comes great responsibility.

#29 boltsniper

boltsniper

    Member

  • Contributors
  • 591 posts

Posted 23 December 2004 - 01:01 PM

That is the spring. Its a coil spring, which is ideal because it provides an extremely high dosplacement and a constant force.
  • 0

#30 Ironman

Ironman

    Member

  • Members
  • 448 posts
  • Location:Pennsylvania

Posted 24 December 2004 - 03:31 PM

Where could I buy one because I didn't see one in ACEhardware?
Where did you get it.
  • 0
Die with honor...Fight with pride...
Aim toward your goals...Quicken your stride...
With great power comes great responsibility.

#31 boltsniper

boltsniper

    Member

  • Contributors
  • 591 posts

Posted 02 January 2005 - 01:29 AM

The spring is from a retail fixture. You kow, those things that push the stuff forward as you pull one out. Mainly used in the medication aisles or the DVDs/Video Games. I`m not sure where you could buy one..... I got mine from Toys R Us when I worked there. If anyone wants one bad enough I may be able to get some more from TRU.
  • 0

#32 gordon

gordon

    Member

  • Members
  • 59 posts

Posted 02 January 2005 - 02:40 PM

I have had an idea to mod a gun based on a home-made clip. The clip would be a lot of miniature pvc barrels or brass or whatever you wanna use. Just line the them up and glue them together or whatever. Anyway it would work like this:

The little barrels in the clip (which are loaded with darts) connect the plunger mechanism to the real barrel. So basically you have like a split barrel and one part gets removed and replaced. You would have to find a way to attach the end part of the barrel to the gun without ataching it to the plunger, and a way to ensure air-flow would not be lost through through spaces between the plunger, clip, and barrel. Just a thought. Maybe you guys can work on it a bit. And you would also need a way to move the barrel (which shouldn't be to hard to figure out).
  • 0
kill or be killed


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users