5 replies to this topic

[Moose Hunt]

I am modding my x-bow and I can't get the coupler to stick to the plunger tube. I have used plastic fusion epoxy and plumbers goop and both fall off with the slightest pull or even touch. Does any one have any tips. Oh by the way the epoxy and plumbers goop were applied at two seperate times.

[ompa]

Try sanding and cleaning the surfaces before gluing them together.

I'm assuming you're letting the stuff dry, as Moosenukem said, for the requisite amount of time. Please don't prove me wrong.

~ompa

Edited by ompa, 24 November 2004 - 06:36 PM.

[moosenukem]

Make sure your letting the coupler dry for for 24 hours before using them. If that doesn't work then try ompa's idea.

Edited by moosenukem, 24 November 2004 - 07:24 PM.

[nerfspecialforces]

Either I'm smoking stuff again or is this in the wrong section?

[moosenukem]

Nah your safe. Its in the wrong forum.

[Moose Hunt]

Well I was reading an off topic post when I posted this and I accidently didn't look at the topic and posted anyways.