11 replies to this topic

[Tarius]

My idea isn't new just complicated, I like to complicate things(no coments peps), I am thinking of making a loser rifle, simple yet complicated.

The loser rifle is just a CO2 micro firing PVC one. The gun is loaded from the top. I need help with the magazine, the Loading from the top. I need it to have 5 micros droped in, clamp it or something, and fire one micro at a time.

yes it would have to be a breech loader.

Please Help.

[AirApache]

The loser rifle is just a CO2 micro firing PVC one.

Wait, so do you mean using co2 cartridges as the "air tank", firing nerf micro stefans? I'm kind of confused...

Can you draw a pic on paint to give me an idea of your concept?

[ompa]

Think of it this way: A paintball gun with a barrel stuck on it to fire nerf darts.

I'm hoping to start on one eventually... But long after you and many other people have done it.

Good luck man.

~ompa

[NinjZ]

Just pay $30 for one of those all plastic pump Talons and stick a PVC barrel on it. IF you're going co2 and want a "loser rifle" just play paintball. NERF is about smaller ranges.

[moosenukem]

With all these C02 guns wanting to be made, why wouldn't they like blow out the pvc, or even the darts?

[THIRST]

PVC cant hold the pressures of compressed c02.

THIRST

[Tarius]

what can and don't say brass.

[cxwq]

You need a co2 regulator, don't try to build one. Use either a co2 powered bike pump or a cheap pb gun and remove the co2 regulator.

[Tarius]

thanks, and now for the seal what is the best sealent and way to seal homemades up? I did look in the homemade section for some help.

I'm not going to take this persons gun but if mine doesn't work out he had instructions. Here is the link- http://www.filebox.v...erf/sniper2.htm

Edited by Tarius, 17 November 2004 - 07:53 PM.

[cxwq]

Boltsniper's design is nice. Good luck making something like that - he spent dozens of hours carefully dremeling PVC to build that monster.

Plumbers goop will seal PVC to non-PVC. For PVC to PVC joins, use PVC cement.

[Viper]

Seriously though, you could just do minor modifications to a talon or some other cheap c02 gun and prob save money+ time. You'll basically end up buildding the same thing anyway. The barrel is really all you need to replace.

[Tarius]

I wnat t ospend the time, and I will have a long time to build it anyway. I just need the help with the materials.