Does plugging overpressure release valve really affect the distances. I'm about to undergo plugging my Airtech 3000 but not do the barrel mod. Will that be good or bad. THanks
![Photo](http://nerfhaven.com/forums/uploads/AustinPowers/austinpowers-drevil.gif?_r=0)
Overpressure Release Valve Question
Overpressure release valve Question
Started by the guy who unleashed hell, Nov 15 2004 07:18 PM
3 replies to this topic
#1
Posted 15 November 2004 - 07:18 PM
#2
Posted 15 November 2004 - 07:23 PM
If you don't do a barrel mod then you have bigger problems than the pressure level. Yes, it makes a big difference, but the stock air restrictors in the barrels will probably counter most of the benefit.
<meta name="cxwq" content="mostly water">
#3
Posted 15 November 2004 - 07:26 PM
thank you and the best way to get the restrictors out is by pliers? Or will it be too hard and would be easier to cut the barrels?
#4
Posted 15 November 2004 - 07:37 PM
I've never tried pulling them out with pliers. I don't know if you'd be able to get the whole thing out that way. I do know for sure that cutting it will work. If you really want to use the stock barrels you could cut them then reattach them.
<meta name="cxwq" content="mostly water">
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users