Does plugging overpressure release valve really affect the distances. I'm about to undergo plugging my Airtech 3000 but not do the barrel mod. Will that be good or bad. THanks
Overpressure Release Valve Question
Overpressure release valve Question
Started by the guy who unleashed hell, Nov 15 2004 07:18 PM
3 replies to this topic
#1
Posted 15 November 2004 - 07:18 PM
#2
Posted 15 November 2004 - 07:23 PM
If you don't do a barrel mod then you have bigger problems than the pressure level. Yes, it makes a big difference, but the stock air restrictors in the barrels will probably counter most of the benefit.
<meta name="cxwq" content="mostly water">
#3
Posted 15 November 2004 - 07:26 PM
thank you and the best way to get the restrictors out is by pliers? Or will it be too hard and would be easier to cut the barrels?
#4
Posted 15 November 2004 - 07:37 PM
I've never tried pulling them out with pliers. I don't know if you'd be able to get the whole thing out that way. I do know for sure that cutting it will work. If you really want to use the stock barrels you could cut them then reattach them.
<meta name="cxwq" content="mostly water">
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users