3 replies to this topic

[the guy who unleashed hell]

Does plugging overpressure release valve really affect the distances. I'm about to undergo plugging my Airtech 3000 but not do the barrel mod. Will that be good or bad. THanks

[cxwq]

If you don't do a barrel mod then you have bigger problems than the pressure level. Yes, it makes a big difference, but the stock air restrictors in the barrels will probably counter most of the benefit.

[the guy who unleashed hell]

thank you and the best way to get the restrictors out is by pliers? Or will it be too hard and would be easier to cut the barrels?

[cxwq]

I've never tried pulling them out with pliers. I don't know if you'd be able to get the whole thing out that way. I do know for sure that cutting it will work. If you really want to use the stock barrels you could cut them then reattach them.