Jump to content


Photo

Modifications For Some Nerf Guns

Hornet, Titan, Scout, Nite Finder, AT?K

30 replies to this topic

#1 MattPaintballer

MattPaintballer

    Member

  • Members
  • 369 posts
  • Location:Where the slots are plentiful, and the yards are small

Posted 31 October 2004 - 03:02 PM

Hello. I have 5 Nite Finders and one N-Strike system, and I would like to modify them. I have searched so don't tell me to search! I found one mod for the Nite Finder, but all it said was to increase barrel length which does jack squat for me because the local Home Depots don't sell the stuff for Stefans... I would really like to modify my fix the P.O.S, aka the Scout so as to get SOME performance out of it. Is there anyway I can increase the range for my Hornet and my Nite Finders??? I don't know what I can do with the Titan... it's just cool ^_^. I have an Airtech of some sort, I don't know what model it is cuz I got it as a birthday present. Many people have said that AirTechs are good, but I would seriously rather have a Scout in my hand than my AirTech cuz the AirTech is so big and doesn't yield much performance. Anyways, if you can tell me what model it is, it looks like this: Posted Image
  • 0
"I think politicians are much more irritating than hippies."
"the56ace,
Your member account at NerfHaven has been temporarily suspended because I don't like you."
-cxwq
If ignorance is bliss, our president must be ecstatic.

#2 Chessler

Chessler

    Member

  • Members
  • 337 posts
  • Location:Europe, Austria
  • Country:Austria

Posted 31 October 2004 - 03:08 PM

Posted Image

Dude, check the pic before you ask something already answered.
  • 0

#3 MattPaintballer

MattPaintballer

    Member

  • Members
  • 369 posts
  • Location:Where the slots are plentiful, and the yards are small

Posted 31 October 2004 - 03:10 PM

If you can't help don't reply and do shut up.

Edited by MattPaintballer, 31 October 2004 - 03:11 PM.

  • 0
"I think politicians are much more irritating than hippies."
"the56ace,
Your member account at NerfHaven has been temporarily suspended because I don't like you."
-cxwq
If ignorance is bliss, our president must be ecstatic.

#4 Dan Wask

Dan Wask

    Member

  • Members
  • 436 posts

Posted 31 October 2004 - 03:14 PM

He means that the model of the gun is on a big freaking sticker on the side.
  • 0
QUOTE (Arcanis @ Apr 9 2005, 12:02 AM)
When I insert a dick, nothing happens.


#5 ompa

ompa

    Introductinator

  • Moderators
  • 2,368 posts

Posted 31 October 2004 - 03:25 PM

Hm... I enjoy the rudeness you bring to the forums!

Anyways, apparently you don't know HOW to search, as I posted mods for the entire N-strike set just about 2 months ago. It's called search parameters, USE THEM. Searching is pointless if you don't search in the right place. Extend your search period to several months and try again. Try the terms:

Hornet mod
Titan mod
Scout mod

That's just for the N-strike.

I have searched so don't tell me to search!


Search again.



Wow, you find the picture, you HAVE the gun, both the gun AND the picture have stickers on them, and you still can't find the name? I'll do it for you. It's the Airtech 4000. Here's a picture to help you.

Posted Image

For the Airtech 4000, try www.nerfworld.com. If you PETG the thing, it'd be a beast of a gun. All guns can be modified, the Airtech 4000 is certainly not an exception.

As for the Nitefinder, if you really can't


Use sch40 pvc and stock micros.



Don't insult the members for helping you, and don't insult the members for pointing out obvious stuff that you should have noticed. Especially since he pointed it out in a NICE way. You should be happy that someone pointed it out nicely.

Nice job on the grammer though, just watch your attitude, it won't get you anywhere here.

~ompa
  • 0

#6 THIRST

THIRST

    Member

  • Members
  • 1,099 posts

Posted 31 October 2004 - 03:39 PM

I dont know bout you all, but I can most definatly not see what number that si in the picture, looks more like a 2 or 3, so give the guy a break. No body helped him, they were just being asses. But listen to Ompa, generelize your search a bit perhaps?

THIRST
  • 0
ko

#7 ompa

ompa

    Introductinator

  • Moderators
  • 2,368 posts

Posted 31 October 2004 - 03:43 PM

Eh, I can read it just fine. Maybe it's just my glasses. But he HAS the gun. And the all the Airtech guns come with the sticker on them.

I'm just griping because he was rude to a fellow member for not really being that big of an ass.

titan
hornet
scout

Simply use sch40 pvc in place of the brass in the mods.

THIRST, did you get a girlfriend? You're going all soft and mushy on us. I remember when you used to bash everyone, now those were good times.

~ompa

Edited by ompa, 31 October 2004 - 03:49 PM.

  • 0

#8 Raptor

Raptor

    Member

  • Members
  • 15 posts
  • Location:Seal Beach, CA

Posted 31 October 2004 - 03:59 PM

Sure u could mod that huge thing or u could mod it and rip off the shell and reduce the size and mount it on somthin else. Oh and BTW these guys know what their talking about so don't insult them.

Edited by Raptor, 31 October 2004 - 04:00 PM.

  • 0
Never run from a loser, you'll only die tired.

#9 MattPaintballer

MattPaintballer

    Member

  • Members
  • 369 posts
  • Location:Where the slots are plentiful, and the yards are small

Posted 31 October 2004 - 04:02 PM

I have bad eyes and the picture looks like it says 3000 or 2000, and for some reason my AT either came with no stickers or they were scratched/peeled off before I recieved the gun.

Don't insult the members for helping you, and don't insult the members for pointing out obvious stuff that you should have noticed. Especially since he pointed it out in a NICE way. You should be happy that someone pointed it out nicely.


Maybe I took it the wrong way, but seems to me that Chessler is calling me stupid. There is nothing nice about calling somebody stupid, therefore I have every right to insult his ass. And I'm not stupid either. I was bumped up 2 grades, and I am waiting for the results of another test. Now call me stupid you little prick Posted Image

I appreciate people like ompa and THIRST, who actually read what they type before they post, and think of what somebody else would think when they read it. And they don't make pointless comments to increase their stupidity level or their post count, they are actually helpful and kind. But kindness matters more than the helpfulness, and kindness is what is lacking in these forums. What a perfect greeting, being called stupid after your first post on a forum. That really makes me want to come here again.

Edited by MattPaintballer, 31 October 2004 - 04:09 PM.

  • 0
"I think politicians are much more irritating than hippies."
"the56ace,
Your member account at NerfHaven has been temporarily suspended because I don't like you."
-cxwq
If ignorance is bliss, our president must be ecstatic.

#10 ompa

ompa

    Introductinator

  • Moderators
  • 2,368 posts

Posted 31 October 2004 - 04:07 PM

This forum isn't known for it's kindness, that's more of NHQ. And it's a nerf forum, don't take insults so seriously.

Intelligence has nothing to do with grades. I think grades more or less reflect common sense and work ethic.

And don't mind my post count, I have NO idea how it got that high. I think MOST of my posts have been useful... kinda... sorta... Ah who am I kidding.

~ompa
  • 0

#11 Chessler

Chessler

    Member

  • Members
  • 337 posts
  • Location:Europe, Austria
  • Country:Austria

Posted 31 October 2004 - 04:16 PM

Maybe I took it the wrong way, but seems to me that Chessler is calling me stupid.

Hey, I didn't want to say you're stupid.

If I wanted to say you're stupid, I would have written it.
  • 0

#12 ompa

ompa

    Introductinator

  • Moderators
  • 2,368 posts

Posted 31 October 2004 - 04:19 PM

Ok this is done, we're all happy yay wooo party!

Matt, you COULD actually rip the heads off of your stock darts, then put some hot glue, a weight, then hot glue a dome on the top and you'll have excellent performing stefan substitutes.

~ompa
  • 0

#13 physiquemodified

physiquemodified

    Member

  • Members
  • 18 posts

Posted 01 November 2004 - 11:48 AM

Here mattpaintballer let me help you with the mod for the titan, i have an excellent one that will crush anyother mod for the titan. First take a 2 inches of 17/32'' brass and wrap some electrical tape around the brass until a 2 inch piece of a 1/2'' pvc fits firmly over it and then hot glue a ring of glue around the gap between the brass and the pvc. Then hot glue that into the orange thing and by the way, in order to fit the pvc/brass into the orange thing, you have to sandpaper the crap out of the pvc until it fits. Once you do that take 12 inches of 9/16'' brass and wrap two rings of tape around that until 8 inches of a 1/2'' of pvc fits over that and make sure that the pvc slides over the brass so that there is about a 1/2 inch to 1 inch space between one of the ends of the brass. Then take a 1/2 inch coupler and connect them and then you are done! You also can plug up the pump release valve and you can do the trigger pull mod. My expectations for this gun are...pain!
  • 0

#14 AirApache

AirApache

    Member

  • Members
  • 743 posts
  • Location:Indianapolis, IN
  • State:Indiana
  • Country:United States

Posted 01 November 2004 - 05:09 PM

Maybe I took it the wrong way, but seems to me that Chessler is calling me stupid. There is nothing nice about calling somebody stupid, therefore I have every right to insult his ass. And I'm not stupid either. I was bumped up 2 grades, and I am waiting for the results of another test. Now call me stupid you little prick Posted Image

I appreciate people like ompa and THIRST, who actually read what they type before they post, and think of what somebody else would think when they read it. And they don't make pointless comments to increase their stupidity level or their post count, they are actually helpful and kind. But kindness matters more than the helpfulness, and kindness is what is lacking in these forums. What a perfect greeting, being called stupid after your first post on a forum. That really makes me want to come here again.


Your post was stupid, and the posts afterward were too.. You should have clarified that you couldn't see the number and that your gun didn't have a sticker. Otherwise you would and did look like a dumbass. Also...ompa emphasized that there is a search button for a reason.

Wow...arrogance level is soaring. I don't fucking care about your grade level. Your maturity level is still like a little five year old. Grow up for God's sake. Many people have been flamed on their first post, including me, but most of us don't cry about it. And when people get flamed (for a good reason), they normally realize that they were being asshats, instead of being an idiot and trying to flame back.

I don't fucking care about how many posts people have. If someone needs to be told that their being an asshole, then someone should tell them.

Your questions have been answered already, so I don't have to answer it again. But I had to reply because you were being such an idiot. Welcome to the Forums; grow up.

AirApache

Edited by AirApache, 01 November 2004 - 05:11 PM.

  • 0
Indiana '11

#15 Airsoft999

Airsoft999

    Member

  • Members
  • 342 posts

Posted 01 November 2004 - 07:01 PM

Here mattpaintballer let me help you with the mod for the titan, i have an excellent one that will crush anyother mod for the titan. First take a 2 inches of 17/32'' brass and wrap some electrical tape around the brass until a 2 inch piece of a 1/2'' pvc fits firmly over it and then hot glue a ring of glue around the gap between the brass and the pvc. Then hot glue that into the orange thing and by the way, in order to fit the pvc/brass into the orange thing, you have to sandpaper the crap out of the pvc until it fits. Once you do that take 12 inches of 9/16'' brass and wrap two rings of tape around that until 8 inches of a 1/2'' of pvc fits over that and make sure that the pvc slides over the brass so that there is about a 1/2 inch to 1 inch space between one of the ends of the brass. Then take a 1/2 inch coupler and connect them and then you are done! You also can plug up the pump release valve and you can do the trigger pull mod. My expectations for this gun are...pain!

Not the best mod. Ompa's is the best, since yours won't allow for the rocket to be used.
And his gets 200 +-15 feet. Matt- people aren't gonna say oh my garsh, you are so smart. 2 Grades- you must be a genius!!!...

...we have CX here.
  • 0

#16 Drano

Drano

    Member

  • Members
  • 103 posts
  • Location:Pasadena, CA

Posted 05 November 2004 - 04:10 PM

Maybe I took it the wrong way, but seems to me that Chessler is calling me stupid. There is nothing nice about calling somebody stupid, therefore I have every right to insult his ass. And I'm not stupid either. I was bumped up 2 grades, and I am waiting for the results of another test. Now call me stupid you little prick

now who the hell, points out what grade they're in to make a point, what grades were you bumped up from ? kindergarten and 1st ?
  • 0

#17 physiquemodified

physiquemodified

    Member

  • Members
  • 18 posts

Posted 10 November 2004 - 09:36 AM

Just for funs sake i modified my stefan by putting a bolt into the top of the dart instead of a bb and when i shot it, it went straight through a coke can making a perfect piercing hole and then traveling 50 feet more.
  • 0

#18 Chessler

Chessler

    Member

  • Members
  • 337 posts
  • Location:Europe, Austria
  • Country:Austria

Posted 10 November 2004 - 09:52 AM

Just for funs sake i modified my stefan by putting a bolt into the top of the dart instead of a bb and when i shot it, it went straight through a coke can making a perfect piercing hole and then traveling 50 feet more.

Eh, what the hell?
  • 0

#19 Fuse

Fuse

    Member

  • Members
  • 343 posts
  • Location:Atlanta, GA

Posted 10 November 2004 - 11:32 AM

Just for funs sake i modified my stefan by putting a bolt into the top of the dart instead of a bb and when i shot it, it went straight through a coke can making a perfect piercing hole and then traveling 50 feet more.

Eh, what the hell?

Agreed.
Tip forward or in to the dart?

PS.
The title of the original pic was "4000.jpg"
Just thought someone else might have noticed that in the argument. :cry:
  • 0
Death is nothing, but to live defeated and inglorious is to die daily.

#20 Chessler

Chessler

    Member

  • Members
  • 337 posts
  • Location:Europe, Austria
  • Country:Austria

Posted 10 November 2004 - 12:58 PM

The title of the original pic was "4000.jpg"
Just thought someone else might have noticed that in the argument. :cry:

Owned.
  • 0

#21 MattPaintballer

MattPaintballer

    Member

  • Members
  • 369 posts
  • Location:Where the slots are plentiful, and the yards are small

Posted 19 November 2004 - 08:10 PM

I apologize, I was really mad that day (when I made the other posts). I guess I should have looked at the name of the picture, but I really don't pay attention to that kind of stuff. But umm, now I'm confused. I opened up my NiteFinder, and there's the orange restrictor and the peg and stuff. But there's 5 pieces and a spring. I can put it back together, but I don't know what to do to increase range. I know you're supposed to take out the peg, but what else?
  • 0
"I think politicians are much more irritating than hippies."
"the56ace,
Your member account at NerfHaven has been temporarily suspended because I don't like you."
-cxwq
If ignorance is bliss, our president must be ecstatic.

#22 okto

okto

    Member

  • Members
  • 590 posts
  • Location:tulsa OK/fort worth TX

Posted 19 November 2004 - 08:27 PM

check your NHQ thread.
  • 0

#23 Guest_nerferdude_*

Guest_nerferdude_*
  • Guests

Posted 19 November 2004 - 10:32 PM

ahhhh, we're like family now.... :cry:
  • 0

#24 rawray7

rawray7

    Member

  • Members
  • 549 posts

Posted 19 November 2004 - 11:57 PM

I apologize, I was really mad that day (when I made the other posts). I guess I should have looked at the name of the picture, but I really don't pay attention to that kind of stuff. But umm, now I'm confused. I opened up my NiteFinder, and there's the orange restrictor and the peg and stuff. But there's 5 pieces and a spring. I can put it back together, but I don't know what to do to increase range. I know you're supposed to take out the peg, but what else?

and this is why i think having your child skip grades is stupid. they simply never learn how to use the search function. in fact, right now i'd post a direct link to ragornock's nitefinder mod, but i'm going to be a pain in the ass. try going to modifications, and then to nitefinder. after that search the forum your in: theres hundreds of old and new topics about the nitefinder, and while your at it stop being a little bitch.

Edited by rawray7, 19 November 2004 - 11:58 PM.

  • 0
You, nerfboi, are the suckest gun. -neonerfer

#25 moosenukem

moosenukem

    Member

  • Members
  • 405 posts

Posted 20 November 2004 - 01:49 AM

If you guys wanna see my crossbow (breech and coupler) mod I'll show you it. They both get 90'.
  • 0


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users