Instead Of A Breech
Posted 29 October 2004 - 05:43 AM
il draw this up then post some pics here soon
please post what you think because i want to make it as good as i can( with your help)
Posted 29 October 2004 - 05:46 AM
Posted 29 October 2004 - 06:09 AM
Posted 29 October 2004 - 06:27 AM
Posted 29 October 2004 - 07:51 AM
Use correct grammer please, it's just the rules on the forum.
Posted 29 October 2004 - 06:40 PM
e-mail me if you want to see
Posted 29 October 2004 - 07:00 PM
Posted 29 October 2004 - 07:36 PM
Call me NSF
Posted 30 October 2004 - 12:03 AM
Please please please, just one more sentence without a period or a capitalized letter, you can do it.
I did it a while ago. The key is to use lots of hot glue and an o-ring.
I had always wondered about that.....
In an attempt to make this post infintesimally less useless... I actually misinterpretted the post as talking about a hinged breach. Like cutting out a dart shaped hole in a barrel, and covering the hole with a piece of barrel material that is hinged with some flexible material like cloth, or maybe an actual hinge. if you used some velcro or a snap or some other means of keeping it closed you could just flip it open, pop in a dart, and flip it closed. Possibly in less time than it takes to rear load a pvc barrel and jam it into a coupling (NJ style. All you outsiders just pretend I said "less time than it takes to blow/ramrod a mini down some brass")
You can poop in my toilet anytime champ.
Posted 30 October 2004 - 07:54 AM
To upload pictures, go to Imageshack and click browse. Choose your picture, and click 'Host It'. Once you upload your picture, copy the contents of the first white box to your post. It's that easy. (Thank you Vintage)
Posted 30 October 2004 - 12:23 PM
Very quick and sloppy... but like that?
Call me NSF
Posted 01 November 2004 - 01:20 AM
i hope the pic works
Posted 01 November 2004 - 07:41 AM
...i hope the pic works
Posted 01 November 2004 - 05:15 PM
Posted 02 November 2004 - 12:43 AM
Next time i go to a hrdwear store im gonna buy the parts for it and hopefuly it will work
Posted 02 November 2004 - 03:24 PM
As for sealing the barrel assembly, you could probably buy an O-ring slightly smaller than the PVC and maybe epoxy it on. I'm not sure how well hot glue would work, since the heat may warp the O-ring a bit.
And as for the barrel staying in place after loading it, why not have a small piece of string fixed permanently to the gun, and then have a screw about a 1/4 way down the barrel, and tie the string around it multiple times. I guess the most accurate comparison would be those envelopes that you close with string.
Just some suggestions. Remember, I just got back in to this, so I'm not sure.
Posted 18 November 2004 - 12:29 AM
Sorry for replying in an old topic, but this is how I would make a shotgun break action breech.
The clothespin would hold the metal loop so the barrel would stay sealed.
Posted 18 November 2004 - 02:39 AM
but a fault in it
the peg wont be strong enough to hold a 15" pvc barrel with brass in it
and it wouldnt get the perfect seal
and a pin or something like that would take too long to remove and replace
i dont wont to be piccy or anything though
Edited by notorious_oxide, 18 November 2004 - 02:41 AM.
Posted 18 November 2004 - 04:02 PM
Basically, the black thing is the hinge, and the grey piece ON the hinge is a SCH40 coupler. The coupler on the right side will connect to the airtank(s), and the coupler on the left will be sawed so it's only maybe 3/4 of an inch long. Therefore, an SCH40/80 barrel would still be able to slide around within the coupler. The other small piece around the barrel would be something to prevent it from falling out, even tape would work here. So basically, you pull the barrel out slightly, let it fall, load it, bend it back up, and seal the barrel against the coupler. Not SURE if it would work, but I think it should.
Pointed out by Air: Notorious, never, EVER do that again. The splitting of ideas was fine, but for christ's sake use periods. Capitalization would be nice too. And Piccy is Picky.
That's a good idea,
but a fault in it is that
the peg wouldn't be strong enough to hold a 15" pvc barrel with brass in it.
Also, it wouldn't get a perfect seal.
In addition to the aforementioned, the pin or something like it would take too long to remove and replace.
I dont wont to be picky or anything though.
There's your new, quasi-grammatically correct post. Post more like the above.
Edited by ompa, 18 November 2004 - 05:43 PM.
Posted 18 November 2004 - 05:56 PM
Obviously out of proportion; but going for the spreadfire idea. I don't know why I drew the arrow there. Maybe to show where the shots go...but that doesn't seem quite right...
Sorry for the off-trackedness, but it came to me on the spur of the moment.
Edited by AirApache, 18 November 2004 - 05:57 PM.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users