Jump to content


Photo

Homemade Breech Questions


9 replies to this topic

#1 V1Ru5 004

V1Ru5 004

    Member

  • Members
  • 34 posts
  • Location:GA

Posted 03 September 2004 - 07:19 PM

Correct me if im rong

To do the breech, all you need to do is cut a rectangle in the 1" PVC, put the foam sheet in there, make sure it fits, cut a rectangle in that with a knife. Load the dart in there, then put the 1/2" PVC in there?
  • 0

#2 Airsoft999

Airsoft999

    Member

  • Members
  • 342 posts

Posted 03 September 2004 - 07:27 PM

Correct me if im rong

That was wrong :P .

I believe that is correct, although I, as well, am a little confused with breach loading.

Edited by Airsoft999, 03 September 2004 - 07:29 PM.

  • 0

#3 V1Ru5 004

V1Ru5 004

    Member

  • Members
  • 34 posts
  • Location:GA

Posted 03 September 2004 - 08:46 PM

Ok, can someone tell me the right way to do it?
  • 0

#4 Arcanis

Arcanis

    Member

  • Members
  • 240 posts

Posted 03 September 2004 - 08:54 PM

Put the foam on the 1/2".

To reload, pull the 1/2" forward and load a dart through the cut away part of the 1".
  • 0

-i hate the yankees as much as the next guy, but i'm only sixteen and i'm not ready for the ice age, or the apocalypse...whichever the great bambino has destined for us. -Rawray7



#5 V1Ru5 004

V1Ru5 004

    Member

  • Members
  • 34 posts
  • Location:GA

Posted 03 September 2004 - 08:55 PM

So you put the dart in the rectangle in the 1" PVC, then slide in the 1/2"pvc into the 1"?

Edited by V1Ru5_004, 03 September 2004 - 09:04 PM.

  • 0

#6 Vintage

Vintage

    Member

  • Members
  • 462 posts
  • Location:Minnesota

Posted 03 September 2004 - 09:07 PM

No, you actually pull the 1/2" PVC out. Then you push the dart into the 1/2" PVC through the hole in the 1" PVC. You have to physically slide the dart into the 1/2" PVC. All the hole is there for is so you don't have to pull the barrel all the way out to do it.

~Vintage
  • 0
You can get much further with a kind word and a gun than you can with a kind word alone
~Al Capone

#7 V1Ru5 004

V1Ru5 004

    Member

  • Members
  • 34 posts
  • Location:GA

Posted 03 September 2004 - 09:12 PM

Oh, thanks. Can you do that with cpvc too?
  • 0

#8 Vintage

Vintage

    Member

  • Members
  • 462 posts
  • Location:Minnesota

Posted 03 September 2004 - 09:24 PM

If you want to do the same breech with CPVC, you will probably want to use 3/4" PVC instead of 1". I just don't know how much space needs to be sealed between the CPVC and the PVC. You might need to find some subsitute for foam craft sheet.

~Vintage
  • 0
You can get much further with a kind word and a gun than you can with a kind word alone
~Al Capone

#9 V1Ru5 004

V1Ru5 004

    Member

  • Members
  • 34 posts
  • Location:GA

Posted 03 September 2004 - 09:31 PM

Thanks so much. It helped me out alot.
  • 0

#10 Zero Talent

Zero Talent

    Member

  • Contributors
  • 606 posts

Posted 04 September 2004 - 12:57 AM

That breech is about as simple as it gets, which is why it sucks so much. Do a keyword search for "breech" in mods and homemades if you want better models.
  • 0
"'Revere me as hot! All others are not! THIS, I COMMAND!'"
- Death


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users