I was modding my hornet and drilled through thos little white disks after removing the restrictors.I plugged the pump and closed the gun back up,and it was all put together correctly. Then I tried pumping it up but it is leaking out of every barrel,I dont see anything wrong with it but it is leaking horribly and doesnt work,I dont think I can take it back because i dont have the box and the other guns are modded, Any suggestions would be appreciated.
1 reply to this topic
#2
moosenukem
-
- Members
- 405 posts
Member
Posted 02 September 2004 - 11:22 AM
Broke teh valve or aqt least the part that gives the valve a seal, I did it on 4 barrels! Just gotta use it for integrations now. Thats what I'm doin with mine, I have a At3k in there and an At2k, bothe barrells ahve rotating turrets. I'll show you a pic when I get some batteries in my camera.
MoosinatoR
Okay here's a pic,
Not done but close. Kinda blury but it gives you an idea.
MoosinatoR
Okay here's a pic,
Not done but close. Kinda blury but it gives you an idea.
Edited by moosenukem, 02 September 2004 - 12:55 PM.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
