#1
Posted 28 August 2004 - 11:13 PM
The six brassy looking things that have a gray thing (nerf "shrapnel") are placed around the outer bladder (blue). The cyan stands for the air inside the unpressurized balloon/bladder. As you can see, the green straw or blowing tube blows right into the inner bladder, filling it up with air (purple). The inner (red) bladder is completely inside the outer bladder, which is why the straw is needed to blow up the balloon externally. The arrow of the blowing tube is just to show that you can make it as long as you want.
Here you see that the outer bladder has a knot or a firm airtight seal, enclosing the inner bladder completely. Currently, you'd be pinching that spot, or twisting it so the air doesnt come out. I have to figure out a way to make it so that there is a delay before the air comes rushing out. You'd have taken the straw out now, since you don't need it anymore.
The need for a mechanism that delays the release of the inner bladder is obvious because of the above picture. The air goes out, filling up the outer bladder and firing off all the nerf "shrapnel" in different directions.
I tried doing it, but two problems have arisen.
1) explained above, a delay is needed.
2) It's really hard to blow up a balloon when there is another outside of it. I don't wanna pass out every time I go to throw a grenade...
AA
#2
Posted 28 August 2004 - 11:41 PM
Call me NSF
N erf
S pecial
F orces
#3
Posted 29 August 2004 - 12:38 AM
#4
Posted 29 August 2004 - 02:18 AM
When you did it did the grenade actually work?
#5
Posted 29 August 2004 - 02:36 AM
#6
Posted 29 August 2004 - 05:13 AM
OMGWTFBBQ ... p!c5 n0 w0rk
Copy and paste URL ...
Edited by taita_cakes, 29 August 2004 - 05:15 AM.
#7
Posted 29 August 2004 - 11:31 AM
~ompa
#8
Posted 29 August 2004 - 03:04 PM
Call me NSF
N erf
S pecial
F orces
#9
Posted 29 August 2004 - 05:41 PM
#10
Posted 30 August 2004 - 01:01 AM
Simply...
Right Click [ on an image ] > Properties ...
Copy the URL...
Paste in address bar...
#11
Posted 30 August 2004 - 03:24 PM
Call me NSF
N erf
S pecial
F orces
#12
Posted 30 August 2004 - 06:47 PM
Edit: ohhhhhh i didnt read taitacakes explanation.
Edited by jpshyboi9, 30 August 2004 - 06:48 PM.
#13
Posted 31 August 2004 - 12:41 AM
If you've already tried Copy and Pasting the URL, then and only then can you whinge...
#14
Posted 31 August 2004 - 08:45 PM
#15
Posted 01 September 2004 - 05:57 AM
Grenade wise; i havnt had much of a chance to look over it, but being a balloon construction it should be cheap and replacable.
#16
Posted 01 September 2004 - 12:24 PM
Call me NSF
N erf
S pecial
F orces
#17
Posted 03 September 2004 - 10:40 PM
Taita, the cheapness was one of the reasons why I wanted to do this. I wanted something you could make in quantities. As far as pressure goes, your right, a balloon will send the shrapnel probably an amazing 1 and a half feet at most... Definately gonna hurt guys!
ompa, the pressure is supposed to push the darts out. That's the idea. But i need a way to hold in the pressure till the grenade lands...
AA
#18
Posted 04 September 2004 - 01:24 AM
Call me NSF
N erf
S pecial
F orces
#19
Posted 04 September 2004 - 09:44 PM
But I need a better idea for an outside case. I'm looking for an item that is cheap, can hit people, and can fit a balloon or some sort of bladder with a lotta air, and etc..you get the pic.
Edited by AirApache, 04 September 2004 - 09:45 PM.
#20
Posted 05 September 2004 - 12:38 AM
What, OH!, you want doen't want injuries...
Then... A ball!!!
Call me NSF
N erf
S pecial
F orces
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users