2 replies to this topic

[ModdingWizard]

This is the stock blaster:

 

 

After opening it up, the first mod is to get rid of the AR:

 

 

 

Now, get carve a small hole in the plunger tube cap to fit 17/32" brass inside:

 

 

 

Next, get rid of the piece in the middle of the plunger tube to allow more airflow:

 

 

 

For spring upgrades, the blaster is compatible with Retaliator springs. For the upgrade, I am using a 7kg Retaliator spring:

 

 

Make sure you upgrade the catch spring with this spring upgrade.

 

For the brass barrel, cut the 17/32" brass to 2.5 inches, and epoxy the brass to the muzzle piece and the plunger tube cap; make sure to let it cure for 24 hours for the best adhesion:

 

 

After you screw the blaster together, you sure be getting around 55 feet flat with great quality darts. Enjoy!

Edited by ModdingWizard, 21 December 2020 - 02:00 PM.

[snakerbot]

Not a terribly exciting mod, but it checks the boxes for performance and practicality, and a nice, quality writeup. Well done!

[ModdingWizard]

Not a terribly exciting mod, but it checks the boxes for performance and practicality, and a nice, quality writeup. Well done!

Thank you, sir. This is my first write-up, tho.