Hey guys, if I were to breech mod my at2k with brass, how long should the 17/32'' barrel be?
At Breech Mod
Started by Whatitis, Aug 28 2004 10:04 PM
2 replies to this topic
#1
Posted 28 August 2004 - 10:04 PM
What?! No! I sell propane!
#2
Posted 28 August 2004 - 10:23 PM
Breech? I'm assuming you mean a nested brass? 9/16 and 17/32? It really depends on where your coupler is. If the coupler is attached directly to the valve piece, you need a piece to fit from the vavle to (atleat) 1/2" into the 9/16th when the barrel is on the coupler. Some people attach a piece of PVC, then a coupler, and then the barrel. This would require a longer 17/32, if you we're to use it.
If your talking about an Unknown breech, I'm not familiar with the use of brass in that design I assume you could have 9/16 sliding inside 1/2" PVC, overlapping the 17/32 piece when primed... could work.
If your talking about an Unknown breech, I'm not familiar with the use of brass in that design I assume you could have 9/16 sliding inside 1/2" PVC, overlapping the 17/32 piece when primed... could work.
Hunter
Organizer Vancouver Area Nerf Series
Organizer Vancouver Area Nerf Series
#3
Posted 28 August 2004 - 10:40 PM
Yes, it's an unknown breech.
Edited by Whatitis, 28 August 2004 - 10:41 PM.
What?! No! I sell propane!
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users