Jump to content


Photo

Tech Target - 3D printed barrel replacements


1 reply to this topic

#1 Daniel Beaver

Daniel Beaver

    HQRSE CQCK

  • Moderators
  • 2,059 posts
  • NerfHaven Subscription Supporter
  • Location:Minneapolis
  • State:Minnesota
  • Country:United States

Posted 12 November 2019 - 11:57 PM

*
POPULAR

This is a 3D printed drop-in replacement for the barrel of a Nerf brand Tech Target blaster.
 
2019-11-12 22.29.52.jpg
The standard barrel replacement is compatible with standard foam darts, simply push the darts into the barrel from the front. This works well with the stock spring, but is not recommended with an upgraded spring, as the high pressures will tend to damage stock darts. The standard barrel is compatible with half length darts, but requires a ramrod to fully insert them. With the stock spring, you can expect velocities of about 80fps.
 
2019-11-12 22.33.28.jpg
 
2019-11-12 22.33.54.jpg
 
The CPVC insert compatible barrel is a receptacle for a CPVC barrel replacement. This is recommended if you are using half length darts and an upgraded spring. A 4" CPVC barrel is optimal, and you can expect velocities of about 140fps.
 
2019-11-12 22.35.13.jpg

Attached Files


Edited by Daniel Beaver, 13 November 2019 - 12:00 AM.

  • 1

#2 EZI 06

EZI 06

    Member

  • FNG1 
  • 1 posts
  • Location:England

Posted 17 November 2019 - 06:45 PM

Nice gun
I'm new to Nerf modding but ur blaster looks cool
  • 0


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users