Jump to content


Rhino Fire Firing Trigger Issue

1 reply to this topic

#1 Gandalfnz



  • FNG2
  • 2 posts

Posted 05 February 2019 - 10:14 PM



I was hoping someone here would be able to help me out with a problem I have on my Rhino Fire Blaster.


The problem is the trigger I believe.


When you press the trigger, I can hear the first click of the switch, but the  gun starts revving and shooting right away.

Pressing the trigger all the way down only speeds up the firing rate.


When I let go of the trigger, blaster still keeps firing very slowly, but does not stop, until I pull one of the mags out, or open the jam door.


I am wondering if the switch is to blame, or some electronic circuit (is there any IC's?) inside the blaster is dead.


If someone has any idea what could be wrong, pleas let me know.


Much appreciated.




  • 0

#2 vandernerf



  • FNG2
  • 2 posts
  • State:Massachusetts
  • Country:United States

Posted 24 April 2019 - 08:55 PM

You may have issue with trigger switch but this could also be spring issue.


If you open up RhinoFire, you will see small spring supporting trigger. Try replace that spring with stronger one. I personally replaced mine with left over orange mod longshot trigger switch.


If replacing spring doesn't solve issue, then probably you need to replace switch.

  • 0

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users